This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

STM32F750N8H6

ARM® Cortex®-M7 STM32F7 Microcontroller IC 32-Bit Single-Core 216MHz 64KB (64K x 8) FLASH 216-TFBGA (13x13)

Manufacturer:

STMICROELECTRONICS
Mfr.Part #:

STM32F750N8H6
Datasheet:

STM32F750N8H6 Datasheet (PDF)
Part Life Cycle Code:

Active
Reach Compliance Code:

compliant
ECCN Code:

5A992.C
HTS Code:

8542.31.00.01

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

STM32F750N8H6 General Description

The STM32F750x8 devices are based on the high-performance Arm®Cortex®-M7 32-bit RISC core operating at up to 216 MHz frequency. The Cortex®-M7 core features a single floating point unit (SFPU) precision which supports all Arm®single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances the application security.The STM32F750x8 devices incorporate high-speed embedded memories with a Flash memory of 64 Kbytes, 320 Kbytes of SRAM (including 64 Kbytes of Data TCM RAM for critical real-time data), 16 Kbytes of instruction TCM RAM (for critical real-time routines), 4 Kbytes of backup SRAM available in the lowest power modes, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses, a 32-bit multi-AHB bus matrix and a multi layer AXI interconnect supporting internal and external memories access.All the devices offer three 12-bit ADCs, two DACs, a low-power RTC, thirteen general-purpose 16-bit timers including two PWM timers for motor control and one low-power timer available in Stop mode, two general-purpose 32-bit timers, a true random number generator (RNG), and a cryptographic acceleration cell. They also feature standard and advanced communication interfaces.Advanced peripherals include an SDMMC interface, a flexible memory control (FMC) interface, a Quad-SPI Flash memory interface, a camera interface for CMOS sensors and a cryptographic acceleration cell.The STM32F750x8 devices operate in the –40 to +105 °C temperature range from a 1.7 to 3.6 V power supply. A dedicated supply input for USB (OTG_FS and OTG_HS) is available on all the packages except LQFP100 for a greater power supply choice.The supply voltage can drop to 1.7 V with the use of an external power supply supervisor. A comprehensive set of power-saving mode allows the design of low-power applications.The STM32F750x8 devices offer devices in 3 packages ranging from 100 pins to 216 pins. The set of included peripherals changes with the device chosen.These features make the STM32F750x8 microcontrollers suitable for a wide range of applications.ST-LINK/V2 in-circuit debugger/programmer for ST.Discovery kit with STM32F750N8 MCU.Evaluation board with STM32F769NI MCU.

Key Features

Core: Arm^® 32-bit Cortex^®-M7 CPU with FPU, adaptive real-time accelerator (ART Accelerator™) and L1-cache: 4-Kbyte data cache and 4-Kbyte instruction cache, allowing 0-wait state execution from embedded Flash memory and external memories, frequency up to 216 MHz, MPU, 462 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1), and DSP instructions.
Memories
- 64 Kbytes of Flash memory
- 1024 bytes of OTP memory
- SRAM: 320 Kbytes (including 64 Kbytes of data TCM RAM for critical real-time data) + 16 Kbytes of instruction TCM RAM (for critical real-time routines) + 4 Kbytes of backup SRAM (available in the lowest power modes)
- Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, NOR/NAND memories
Dual mode Quad-SPI
LCD parallel interface, 8080/6800 modes
LCD-TFT controller up to XGA resolution with dedicated Chrom-ART Accelerator™ for enhanced graphic content creation (DMA2D)
Clock, reset and supply management
- 1.7 V to 3.6 V application supply and I/Os
- POR, PDR, PVD and BOR
- Dedicated USB power
- 4-to-26 MHz crystal oscillator
- Internal 16 MHz factory-trimmed RC (1% accuracy)
- 32 kHz oscillator for RTC with calibration
- Internal 32 kHz RC with calibration
Low-power
- Sleep, Stop and Standby modes
- V_BAT supply for RTC, 32×32-bit backup registers + 4 Kbytes of backup SRAM
3×12-bit, 2.4 MSPS ADC: up to 24 channels and 7.2 MSPS in triple interleaved mode
2×12-bit D/A converters
Up to 18 timers: up to thirteen 16-bit (1x low- power 16-bit timer available in Stop mode) and two 32-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input. All 15 timers running up to 216 MHz. 2x watchdogs, SysTick timer
General-purpose DMA: 16-stream DMA controller with FIFOs and burst support<

Specifications

Source Content uid	STM32F750N8H6	Part Life Cycle Code	Active
Reach Compliance Code	compliant	ECCN Code	5A992.C
HTS Code	8542.31.00.01	Factory Lead Time	53 Weeks, 1 Day
Has ADC	YES	Address Bus Width	26
Bit Size	32	Clock Frequency-Max	26 MHz
DMA Channels	YES	External Data Bus Width	32
Length	13 mm	Number of I/O Lines	168
Number of Terminals	216	PWM Channels	YES
Peak Reflow Temperature (Cel)	NOT SPECIFIED	Speed	216 MHz
Supply Voltage-Max	3.6 V	Supply Voltage-Min	1.7 V
Supply Voltage-Nom	3 V	Surface Mount	YES
Terminal Form	BALL	Terminal Pitch	0.8 mm
Terminal Position	BOTTOM	Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Width	13 mm	uPs/uCs/Peripheral ICs Type	MICROCONTROLLER, RISC