This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

SIP32429DN-T1-GE4

Tape & Reel (TR) Current Limiting (Fixed) Over Temperature UVLO On/Off Slew Rate Controlled Status Flag power distribution switch 3mm 6V 550mus 3.5A

Manufacturer:

Vishay Intertechnology, Inc
Mfr.Part #:

SIP32429DN-T1-GE4
Datasheet:

SIP32429DN-T1-GE4 Datasheet (PDF)
Switch Type:

General Purpose
Number of Outputs:

1
Ratio - InputOutput:

1:1
Output Configuration:

High Side
EDA/CAD Models:

Request Free CAD Models for SIP32429DN-T1-GE4

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

SIP32429DN-T1-GE4 General Description

IC, LOAD SW, -3V TO 30V, DFN-10; Input Voltage:28V; Current Limit:3.5A; On State Resistance:0.056ohm; Distribution Switch Case Style:DFN; No. of Pins:10; Thermal Protection:Yes; On / Enable Input Polarity:Active High; Power Dissipation Pd:1.42W; No. of Outputs:1; Operating Temperature Min:-40°C; Operating Temperature Max:85°C; MSL:MSL 1 - Unlimited

Key Features

6 V to 28 V operation voltage

56 mΩ typical on resistance

Programmable soft start

Programmable current limit

Programmable soft start control

Over temperature protection

Power good, when VOUT reaches 90 % of VIN

Fault flag on for thermal shutdown and OCP

Under voltage lockout: 4.8 V / 5.4 V (typ. / max.)

Auto-retry SiP32429 and latch-off SiP32419 versions

Package: DFN-10 3 mm x 3 mm

IEC 62368-1 certified

Vishay Intertechnology, Inc Original Stock

Application

Computers & Computer Peripherals, Lighting, Imaging, Video & Vision, Consumer Electronics, Industrial, Communications & Networking

Specifications

Category	Integrated Circuits (ICs)Power Management (PMIC)Power Distribution Switches, Load Drivers	Series	-
Switch Type	General Purpose	Number of Outputs	1
Ratio - Input:Output	1:1	Output Configuration	High Side
Output Type	P-Channel	Interface	On/Off
Voltage - Load	6V ~ 28V	Voltage - Supply (Vcc/Vdd)	Not Required
Current - Output (Max)	3.5A	Rds On (Typ)	56mOhm
Input Type	Non-Inverting	Features	Slew Rate Controlled, Status Flag
Fault Protection	Current Limiting (Fixed), Over Temperature, UVLO	Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount	Base Product Number	SIP32429