Payment Method
MAX3221EIPWR
3- to 5.5-V single channel 250kbps RS-232 line driver/receiver with +/-15-kV IEC-ESD protection
-
Manufacturer:
-
Mfr.Part #:
MAX3221EIPWR
-
Datasheet:
-
Type:
Transceiver
-
Protocol:
RS232
-
Number of Drivers/Receivers:
1/1
-
Duplex:
Full
-
EDA/CAD Models:
Availability: 6990 PCS
Please fill in the short form below and we will provide you the quotation immediately.
MAX3221EIPWR General Description
The MAX3221E is a single driver, single receiver RS-232 solution operating from a single VCC supply. The RS-232 pins provide IEC 61000-4-2 ESD protection. The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. These devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/μs driver output slew rate.
Flexible control options for power management are available. Auto-power down disables driver and charge pump when the receiver is disconnected or the remote driver is power down. The drivers can be manually enabled or disabled. INVALID output goes low when receiver input is unconnected or power off.
Key Features
- ESD Protection for RS-232 Pins
- ±15-kV Human-Body Model (HBM)
- ±8 kV (IEC 61000-4-2, Contact Discharge)
- ±15 kV (IEC 61000-4-2, Air-Gap Discharge)
- Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards
- Operates With 3-V to 5.5-V VCC Supply
- Operates up to 250 kbit/s
- One Driver and One Receiver
- Low Standby Current: 1 μA Typical
- Accepts 5-V Logic Input With 3.3-V Supply
- Auto-Power-Down Feature Automatically Disables Drivers for Power Savings
- Alternative High-Speed Device (1 Mbit/s)
- SN75C3221E and SN65C3221E
Application
- Embedded Systems
- Industrial Automation
- Networking Equipment
- Test and Measurement Equipment
- Point-of-Sale (POS) Systems
- Medical Devices
- Automotive Diagnostics
- GPS Receivers
- Serial Communication Modules
- Telecommunications Equipment
Specifications
Category | Integrated Circuits (ICs)InterfaceDrivers, Receivers, Transceivers | Series | - |
Type | Transceiver | Protocol | RS232 |
Number of Drivers/Receivers | 1/1 | Duplex | Full |
Receiver Hysteresis | 500 mV | Data Rate | 250kbps |
Voltage - Supply | 3V ~ 5.5V | Operating Temperature | -40°C ~ 85°C |
Mounting Type | Surface Mount | Base Product Number | MAX3221 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 6990 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for MAX3221EIPWR, guaranteed quotes back within 12hr.
Top Sellers
-
SN65HVD230DR
TI
1000+ $0.403
-
SN75176BP
Texas Instruments
1000+ $0.309
-
PCF8574AN
TI
8-bit 2.5- to 5.5-V I2C/SMBus I/O expander with interrupt
-
MAX232N
Texas Instruments
Dual Transmitter/Receiver RS-232 16-Pin PDIP Tube
-
TCA6424RGJR
Texas Instruments, Inc
24-bit translating 1.65- to 5.5-V I2C/SMBus I/O expander with interrupt, reset & config registers
The product is good, all as in the description