This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

IS25LQ040B-JNLE +BOM

NOR Flash 4Mb QSPI, 8-pin SOP 150Mil, RoHS

Manufacturer:

ISSI, Integrated Silicon Solution Inc
Mfr.Part #:

IS25LQ040B-JNLE
Datasheet:

IS25LQ040B-JNLE Datasheet (PDF)
Part Life Cycle Code:

Obsolete
Reach Compliance Code:

compliant
ECCN Code:

EAR99
HTS Code:

8542.32.00.51
EDA/CAD Models:

Request Free CAD Models for IS25LQ040B-JNLE

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

IS25LQ040B-JNLE General Description

FLASH - NOR Memory IC 4Mbit SPI - Quad I/O 104 MHz 8-SOIC

Key Features

Industry Standard Serial Interface
- IS25LQ040B: 4Mbit/ 512Kbyte
- IS25LQ020B: 2Mbit/ 256Kbyte
- IS25LQ010B: 1Mbit/ 128Kbyte
- IS25LQ512B: 512Kbit/ 64Kbyte
- IS25LQ025B: 256Kbit/ 32Kbyte
- 256-bytes per Programmable Page Standard
- Standard SPI/Dual/Quad Multi-I/O SPI
- Supports Serial Flash Discoverable Parameters
(SFDP)
High Performance Serial Flash (SPI)
- 104 MHz SPI/Dual/Quad Multi-I/O SPI
- 416 MHz equivalent Quad SPI
- 52MB/S Continuous Data Throughput
- Supports SPI Modes 0 and 3
- More than 100,000 erase/program cycles
- More than 20-year data retention
Efficient Read and Program modes
- Low Instruction Overhead Operations
- Continuous data read with Byte Wrap around
- Allows XIP operations (execute in place)
- Outperforms X16 Parallel Flash
Flexible & Cost Efficient Memory Architecture
- Uniform 4Kbyte Sectors or 32/64Kbyte Blocks
- Flexible 4, 32, 64Kbyte, or Chip Erase
- Standard Page Program 1 to 256 bytes
- Program/Erase Suspend and Resume
Low Power with Wide Temp. Ranges
- Single 2.3V to 3.6V Voltage Supply
- 10 mA Active Read Current
- 8 µA Standby Current
- Deep Power Down
- Temp Grades:
Extended: -40°C to +105°C
V Grade: -40°C to +125°C
Auto Grade: -40°C to +125°C
Advanced Security Protection
- Software and Hardware Write Protection
- 4x256-Byte dedicated security area with
user-lockable bits, (OTP) One Time
Programmable Memory
- 128 bit Unique ID for each device
Industry Standard Pin-out & Pb-Free Packages1
- JB = 8-pin SOIC 208mil
- JN = 8-pin SOIC 150mil
- JD = 8-pin TSSOP 150mil
- JV = 8-pin VVSOP 150mil
- JK = 8-contact WSON 6x5mm
- JU = 8-contact USON 2x3mm
- KGD (call factory)
Note1: IS25LQ040B (not available in JD)

Specifications

Part Life Cycle Code	Obsolete	Reach Compliance Code	compliant
ECCN Code	EAR99	HTS Code	8542.32.00.51
Factory Lead Time	40 Weeks	Clock Frequency-Max (fCLK)	104 MHz
JESD-30 Code	R-PDSO-G8	JESD-609 Code	e3
Length	4.9 mm	Memory Density	4194304 bit
Memory IC Type	FLASH	Memory Width	1
Number of Functions	1	Number of Terminals	8
Number of Words	4194304 words	Number of Words Code	4000000
Operating Mode	SYNCHRONOUS	Operating Temperature-Max	105 °C
Operating Temperature-Min	-40 °C	Organization	4MX1
Parallel/Serial	SERIAL	Peak Reflow Temperature (Cel)	260
Programming Voltage	3 V	Seated Height-Max	1.75 mm
Supply Voltage-Max (Vsup)	3.6 V	Supply Voltage-Min (Vsup)	2.3 V
Supply Voltage-Nom (Vsup)	3 V	Surface Mount	YES
Technology	CMOS	Temperature Grade	INDUSTRIAL
Terminal Finish	TIN	Terminal Form	GULL WING
Terminal Pitch	1.27 mm	Terminal Position	DUAL
Time@Peak Reflow Temperature-Max (s)	30	Width	3.9 mm