This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

ATMEGA168V-10MU

8-bit Microcontrollers - MCU 16kB Flash 0.5kB EEPROM 23 I/O Pins

Manufacturer:

MICROCHIP TECHNOLOGY INC
Mfr.Part #:

ATMEGA168V-10MU
Datasheet:

ATMEGA168V-10MU Datasheet (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Active
Reach Compliance Code:

compliant
ECCN Code:

EAR99
EDA/CAD Models:

Request Free CAD Models for ATMEGA168V-10MU

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

ATMEGA168V-10MU General Description

The high-performance, low-power Microchip AVR® RISC-based CMOS 8-bit microcontroller combines 16 KB ISP flash memory with read-while-write capabilities, 512B EEPROM, 1 KB SRAM, 23 general purpose I/O lines, 32 general purpose working registers, three flexible timer/counters with compare modes, internal and external interrupts, serial programmable USART, byte-oriented Two-Wire serial interface, SPI serial port, 6-channel/10-bit A/D converter (8-channel in TQFP and QFN packages), programmable watchdog timer with internal oscillator, and five software selectable power saving modes. By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching one MIPS per MHz, balancing power consumption and processing speed.

Key Features

High performance, low power Atmel® AVR® 8-bit microcontroller
Advanced RISC architecture
– 131 powerful instructions – most single clock cycle execution
– 32 × 8 general purpose working registers
– Fully static operation
– Up to 20 MIPS throughput at 20MHz
– On-chip 2-cycle multiplier
High endurance non-volatile memory segments
– 4/8/16 Kbytes of in-system self-programmable flash program memory
– 256/512/512 bytes EEPROM
– 512/1K/1Kbytes internal SRAM
– Write/erase cyles: 10,000 flash/100,000 EEPROM
– Data retention: 20 years at 85°C/100 years at 25°C()
– Optional boot code section with independent lock bits
In-system programming by on-chip boot program
True read-while-write operation
– Programming lock for software security
QTouch® library support
– Capacitive touch buttons, sliders and wheels
– QTouch and QMatrix acquisition
– Up to 64 sense channels
Peripheral features
– Two 8-bit timer/counters with separate prescaler and compare mode
– One 16-bit timer/counter with separate prescaler, compare mode, and capture mode
– Real time counter with separate oscillator
– Six PWM channels
– 8-channel 10-bit ADC in TQFP and QFN/MLF package
– 6-channel 10-bit ADC in PDIP Package
– Programmable serial USART
– Master/slave SPI serial interface
– Byte-oriented 2-wire serial interface (Philips I2C compatible)
– Programmable watchdog timer with separate on-chip oscillator
– On-chip analog comparator
– Interrupt and wake-up on pin change
Special microcontroller features
– DebugWIRE on-chip debug system
– Power-on reset and programmable brown-out detection
– Internal calibrated oscillator
– External and internal interrupt sources
– Five sleep modes: Idle, ADC noise reduction, power-save, power-down, and standby
I/O and packages
– 23 programmable I/O lines
– 28-pin PDIP, 32-lead TQFP, 28-pad QFN/MLF and 32-pad QFN/MLF
Operating voltage:
– 1.8V - 5.5V for Atmel ATmega48V/88V/168V
– 2.7V - 5.5V for Atmel ATmega48/88/168
Temperature range:
– -40°C to 85°C
Speed grade:
– ATmega48V/88V/168V: 0 - 4MHz @ 1.8V - 5.5V, 0 - 10MHz @ 2.7V - 5.5V
– ATmega48/88/168: 0 - 10MHz @ 2.7V - 5.5V, 0 - 20MHz @ 4.5V - 5.5V
Low power consumption
– Active mode:
250µA at 1MHz, 1.8V
15µA at 32kHz, 1.8V (including oscillator)
– Power-down mode:
0.1µA at 1.8V

Specifications

Source Content uid	ATMEGA168V-10MU	Pbfree Code	Yes
Part Life Cycle Code	Active	Reach Compliance Code	compliant
ECCN Code	EAR99	HTS Code	8542.31.00.01
Factory Lead Time	52 Weeks	Has ADC	YES
Address Bus Width		Bit Size	8
Boundary Scan	NO	CPU Family	AVR RISC
Clock Frequency-Max	10 MHz	DAC Channels	NO
DMA Channels	NO	External Data Bus Width
Format	FIXED POINT	Integrated Cache	NO
JESD-30 Code	S-PQCC-N32	JESD-609 Code	e3
Length	5 mm	Low Power Mode	YES
Moisture Sensitivity Level	1	Number of External Interrupts	2
Number of I/O Lines	23	Number of Serial I/Os	1
Number of Terminals	32	Number of Timers	3
On Chip Data RAM Width	8	On Chip Program ROM Width	16
Operating Temperature-Max	85 °C	Operating Temperature-Min	-40 °C
PWM Channels	YES	Peak Reflow Temperature (Cel)	260
Power Supplies	2/5 V	Qualification Status	Not Qualified
RAM (bytes)	1024	RAM (words)	512
ROM (words)	8192	ROM Programmability	FLASH
Seated Height-Max	1 mm	Speed	20 MHz
Supply Current-Max	12 mA	Supply Voltage-Max	5.5 V
Supply Voltage-Min	1.8 V	Supply Voltage-Nom	3 V
Surface Mount	YES	Technology	CMOS
Temperature Grade	INDUSTRIAL	Terminal Finish	MATTE TIN
Terminal Form	NO LEAD	Terminal Pitch	0.5 mm
Terminal Position	QUAD	Time@Peak Reflow Temperature-Max (s)	40
Width	5 mm	uPs/uCs/Peripheral ICs Type	MICROCONTROLLER, RISC
Series	AVR® ATmega	Programmabe	Verified
Core Processor	AVR	Core Size	8-Bit
Connectivity	I2C, SPI, UART/USART	Peripherals	Brown-out Detect/Reset, POR, PWM, WDT
Number of I/O	23	Program Memory Size	16KB (8K x 16)
Program Memory Type	FLASH	EEPROM Size	512 x 8
RAM Size	1K x 8	Voltage - Supply (Vcc/Vdd)	1.8V ~ 5.5V
Data Converters	A/D 8x10b	Oscillator Type	Internal
Operating Temperature	-40°C ~ 85°C (TA)	Mounting Type	Surface Mount
Base Product Number	ATMEGA168