Payment Method
AM26C31MDREP
Enhanced Product quadruple differential line driver
-
Manufacturer:
-
Mfr.Part #:
AM26C31MDREP
-
Datasheet:
-
Type:
Driver
-
Number of Drivers/Receivers:
4/0
-
Voltage - Supply:
4.5V ~ 5.5V
-
Operating Temperature:
-55°C ~ 125°C
-
EDA/CAD Models:
Availability: 6670 PCS
Please fill in the short form below and we will provide you the quotation immediately.
AM26C31MDREP General Description
The AM26C31 is a differential line driver with complementary outputs, designed to meet the requirements of TIA/EIA -422-B and ITU (formerly CCITT). The 3-state outputs have high-current capability for driving balanced lines, such as twisted-pair or parallel-wire transmission lines, and they provide the high-impedance state in the power-off condition. The enable functions are common to all four drivers and offer the choice of an active-high (G) or active-low (G) enable input. BiCMOS circuitry reduces power consumption without sacrificing speed.
The AM26C31 is characterized for operation over extended temperature range of -55°C to 125°C.
Key Features
- Controlled Baseline
- One Assembly
- One Test Site
- One Fabrication Site
- Extended Temperature Performance of -55°C to 125°C
- Enhanced Diminishing Manufacturing Sources (DMS) Support
- Enhanced Product-Change Notification
- Qualification Pedigree(1)
- Meets or Exceeds the Requirements of TIA/EIA-422-B and ITU Recommendation V.11
- Low Power, ICC = 100 µA Typ
- Operates From a Single 5 V Supply
- High Speed, tPLH = tPHL = 7 ns Typ
- Low Pulse Distortion, tsk(p) = 0.5 ns Typ
- High Output Impedance in Power-Off Conditions
- Improved Replacement for AM26LS31
(1) Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.
Specifications
Category | Integrated Circuits (ICs)InterfaceDrivers, Receivers, Transceivers | Series | - |
Type | Driver | Protocol | - |
Number of Drivers/Receivers | 4/0 | Duplex | - |
Data Rate | - | Voltage - Supply | 4.5V ~ 5.5V |
Operating Temperature | -55°C ~ 125°C | Mounting Type | Surface Mount |
Base Product Number | AM26C31 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
AM26C31MDREP Datasheet PDF
AM26C31MDREP PDF Preview
Availability: 6670 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for AM26C31MDREP, guaranteed quotes back within 12hr.
Top Sellers
-
SN65HVD230DR
TI
1000+ $0.403
-
SN75176BP
Texas Instruments
1000+ $0.309
-
PCF8574AN
TI
8-bit 2.5- to 5.5-V I2C/SMBus I/O expander with interrupt
-
MAX232N
Texas Instruments
Dual Transmitter/Receiver RS-232 16-Pin PDIP Tube
-
TCA6424RGJR
Texas Instruments, Inc
24-bit translating 1.65- to 5.5-V I2C/SMBus I/O expander with interrupt, reset & config registers
Capacitors as in the description. Tolerance 5%. They threw it in the mailbox.