This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

Z16C3010AEC

I/O Controller Interface IC 10MHz CMOS USC XTEMP

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

Controller Interface 100-LQFP (12x12)

Two Independent 0-to-10 Mbps Full-Duplex Channels, each with Two Baud Rate Generators and One digital phase-locked loop (DPLL) for Clock Recovery
32-byte Data FIFO's for each Receiver and Transmitter
110 ns Bus Cycle Time, 16-bit Data Bus Bandwidth
Multi-Protocol Operation under Program Control with Independent Mode Selection for Receiver and Transmitter
External Character Sync Mode for Receive
HDLC/SDLC Mode with Eight-Bit Address Compare, Extended Address Field Option, 16- or 32-bit CRC, Programmable Idle Line Condition, Optional Preamble Transmission and Loop Mode
DMA Interface with Separate Request and Acknowledge for Each Receiver and Transmitter
Channel Load Command for DMA Controlled Initialization
Flexible Bus Interface for Direct Connection to Most Microprocessors, User Programmable for 8 or 16 Bits Wide, Directly Supports 680X0 Family or 8X86 Family Bus Interfaces
Low Power CMOS
68-Pin PLCC/100-Pin VQFP Packages

Category	Integrated Circuits (ICs)InterfaceControllers	Series	USC®
Programmable	Not Verified	Protocol	-
Function	Controller	Interface	-
Standards	-	Voltage - Supply	4.5V ~ 5.5V
Current - Supply	7mA	Operating Temperature	-40°C ~ 85°C
Base Product Number	Z16C30