This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

X9313WSZ +BOM

Digital Potentiometer 10k Ohm 1 Circuit 32 Taps Up/Down (U/D, INC, CS) Interface 8-SOIC

Manufacturer:

Renesas Technology Corp
Mfr.Part #:

X9313WSZ
Datasheet:

X9313WSZ Datasheet (PDF)
Series:

XDCP™
Programmable:

Not Verified
Taper:

Linear
Configuration:

Potentiometer
EDA/CAD Models:

Request Free CAD Models for X9313WSZ

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

X9313WSZ General Description

The Intersil X9313 is a digitally controlled potentiometer (XDCP). The device consists of a resistor array, wiper switches, a control section, and nonvolatile memory. The wiper position is controlled by a 3-wire interface. The potentiometer is implemented by a resistor array composed of 31 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D, and INC inputs. The position of the wiper can be stored in nonvolatile memory and then be recalled upon a subsequent power-up operation. The device can be used as a three-terminal potentiometer or as a two-terminal variable resistor in a wide variety of applications including:

Control
Parameter adjustments
Signal processing

Key Features

Solid-state potentiometer
3-wire serial interface
32 wiper tap points
Wiper position stored in nonvolatile memory and recalled on power-up
31 resistive elements
Temperature compensated
End to end resistance range ±20%
Terminal voltages, -V_CC to +V_CC
Low power CMOS
V_CC = 3V or 5V
Active current, 3mA max.
Standby current, 500µA max.
High reliability
Endurance, 100,000 data changes per bit
Register data retention, 100 years
R_TOTAL values = 1kΩ, 10kΩ, 50kΩ
Packages
8 Ld SOIC, 8 Ld MSOP and 8 Ld PDIP
Pb-free available (RoHS compliant)

Specifications

Category	Integrated Circuits (ICs)Data AcquisitionDigital Potentiometers	Series	XDCP™
Programmable	Not Verified	Taper	Linear
Configuration	Potentiometer	Number of Circuits	1
Number of Taps	32	Resistance (Ohms)	10k
Interface	Up/Down (U/D, INC, CS)	Memory Type	Non-Volatile
Voltage - Supply	5V	Features	-
Tolerance	±20%	Temperature Coefficient (Typ)	±300ppm/°C
Mounting Type	Surface Mount	Operating Temperature	0°C ~ 70°C
Resistance - Wiper (Ohms) (Typ)	40	Base Product Number	X9313
Product Category	Digital Potentiometer ICs	Resistance	10 kOhms
Temperature Coefficient	300 PPM / C	Number of POTs	Single
Taps per POT	32	Wiper Memory	Non Volatile
Digital Interface	Serial (3-Wire)	Operating Supply Voltage	5 V
Operating Supply Current	1 mA	Minimum Operating Temperature	0 C
Maximum Operating Temperature	+ 70 C	Mounting Style	PCB Mount
Termination Style	SMD/SMT	Height	0 mm
Length	4.9 mm	Product Type	Digital Potentiometer ICs
Factory Pack Quantity	100	Subcategory	Digital Potentiometer ICs
Supply Type	Single	Supply Voltage - Max	5.5 V
Supply Voltage - Min	4.5 V	Width	3.9 mm
Unit Weight	0.002540 oz