Payment Method
UA9638CDR
Dual High-Speed Differential Line Driver
-
Manufacturer:
-
Mfr.Part #:
UA9638CDR
-
Datasheet:
-
Number of receivers:
0
-
Number of transmitters:
2
-
Supply voltage (nom) (V):
5
-
Signaling rate (max) (MBits):
15
-
EDA/CAD Models:
Availability: 4067 PCS
Please fill in the short form below and we will provide you the quotation immediately.
UA9638CDR General Description
The uA9638C is a dual high-speed differential line driver designed to meet ANSI Standard EIA/TIA-422-B. The inputs are TTL and CMOS compatible and have input clamp diodes. Schottky-diode-clamped transistors are used to minimize propagation delay time. This device operates from a single 5-V power supply and is supplied in an 8-pin package.
The uA9638 provides the current needed to drive low-impedance loads at high speeds. Typically used with twisted-pair cabling and differential receiver(s), base-band data transmission can be accomplished up to and exceeding 15 Mbps in properly designed systems. The uA9637A dual line receiver is commonly used as the receiver. For even faster switching speeds in the same pin configuration, see the SN75ALS191.
The uA9638C is characterized for operation from 0°C to 70°C.
Key Features
- Meets or Exceeds ANSI Standard EIA/TIA-422-B
- Operates From a Single 5-V Power Supply
- Drives Loads as Low as 50 up to 15 Mbps
- TTL- and CMOS-Input Compatibility
- Output Short-Circuit Protection
- Interchangeable With National SemiconductorTM DS9638
National Semiconductor is a trademark of National Semiconductor Corporation.
Specifications
Number of receivers | 0 | Number of transmitters | 2 |
Supply voltage (nom) (V) | 5 | Signaling rate (max) (MBits) | 15 |
IEC 61000-4-2 contact (±V) | None | Fault protection (V) | -15 to 15 |
Common-mode range (V) | -7 to 7 | Number of nodes | 32 |
Isolated | No | Supply current (max) (µA) | 65000 |
Rating | Catalog | Operating temperature range (°C) | 0 to 70 |
feature-function | Line Transmitter | feature-data-rate | 15Mbps |
feature-transmitter-communication-type | RS-422 | feature-receiver-communication-type | |
feature-number-of-transceivers | feature-number-of-transmitters | 2 | |
feature-number-of-receivers | feature-transmitter-signal-type | Differential | |
feature-receiver-signal-type | feature-number-of-drivers-per-line | 1 | |
feature-number-of-receivers-per-line | feature-driving-mode | ||
feature-power-supply-type | Single | feature-minimum-single-supply-voltage-v | 4.75 |
feature-maximum-single-supply-voltage-v | 5.25 | feature-minimum-dual-supply-voltage-v | |
feature-maximum-dual-supply-voltage-v | feature-maximum-supply-current-ma | 65 | |
feature-packaging | Tape and Reel | feature-rad-hard | |
feature-pin-count | 8 | feature-cecc-qualified | No |
feature-esd-protection | feature-escc-qualified | ||
feature-military | No | feature-aec-qualified | No |
feature-aec-qualified-number | feature-eccn-code | EAR99 | |
feature-svhc | No | feature-svhc-exceeds-threshold | No |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 4067 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for UA9638CDR, guaranteed quotes back within 12hr.
Top Sellers
-
SN65HVD230DR
TI
1000+ $0.403
-
SN75176BP
Texas Instruments
1000+ $0.309
-
PCF8574AN
TI
8-bit 2.5- to 5.5-V I2C/SMBus I/O expander with interrupt
-
MAX232N
Texas Instruments
Dual Transmitter/Receiver RS-232 16-Pin PDIP Tube
-
TCA6424RGJR
Texas Instruments, Inc
24-bit translating 1.65- to 5.5-V I2C/SMBus I/O expander with interrupt, reset & config registers
Unfortunately black color that arrive I am white color