Payment Method
TUSB213RGYR
USB 2.0 high speed signal conditioner with DC boost
-
Manufacturer:
-
Mfr.Part #:
TUSB213RGYR
-
Datasheet:
-
Applications:
Signal Processing
-
Interface:
USB
-
Voltage - Supply:
4.4V ~ 5.5V
-
Mounting Type:
Surface Mount
-
EDA/CAD Models:
Availability: 6060 PCS
Please fill in the short form below and we will provide you the quotation immediately.
TUSB213RGYR General Description
The TUSB213 is a USB High-Speed (HS) signal conditioner, designed to compensate for ISI signal loss in a transmission channel which helps passing USB electrical compliance tests.
TUSB213 has a patent-pending design which is agnostic to USB Low Speed (LS) and Full Speed (FS) signals. LS and FS signal characteristics are unaffected by the TUSB213 while HS signals are compensated.
Programmable signal AC boost and DC boost permits fine tuning device performance to optimize High Speed signals at the connector, this allows use in many different applications.
In addition, TUSB213 is compatible with the USB On-The-Go (OTG) and Battery Charging (BC) protocols.
Key Features
- Compatible with USB 2.0, OTG 2.0 and BC 1.2
- Pin strap or I2C Configurable
- Support for LS, FS, HS signaling
- Ultra-low USB Disconnect and Shutdown Power Consumption
- Scalable solution - Daisy Chain Device for High Loss Applications
- D1P/M and D2P/M Interchangeable and Host/Device Agnostic
- Supports up to 5m pre-channel or 2m post-channel Cable Length
- Four Selectable AC Boost Setting Via External Pulldown Resistor
- DC Boost Along With AC Boost for Best Signal Integrity
Specifications
Category | Integrated Circuits (ICs)InterfaceSpecialized | Series | - |
Applications | Signal Processing | Interface | USB |
Voltage - Supply | 4.4V ~ 5.5V | Mounting Type | Surface Mount |
Base Product Number | TUSB213 | Type | Redriver |
Function | USB 2.0 | USB speed (MBits) | 480 |
Number of channels | 1 | Supply voltage (max) (V) | 5.5 |
Supply voltage (min) (V) | 4.4 | Input/output voltage (min) (V) | 0 |
Input/output voltage (max) (V) | 3.6 | Configuration | USB 2.0 Single-channel |
Features | USB 2.0 Redriver with 4 Meter Cable Redriving Strength RGY Package | Rating | Catalog |
Operating temperature range (°C) | -40 to 85, 0 to 70 | Supply current (max) (µA) | 30000 |
ESD HBM (typ) (kV) | 2 | Bandwidth (MHz) | 240 |
feature-type | USB 2.0 High Speed Signal Conditioner | feature-usb-transceiver | Yes |
feature-usb-speed-type | Full Speed | feature-maximum-data-rate-mbps | |
feature-maximum-operating-frequency-mhz | feature-protocols-supported | USB 2.0 | |
feature-process-technology | feature-interface-type | I2C | |
feature-minimum-operating-supply-voltage-v | 4.4 | feature-maximum-operating-supply-voltage-v | 5.5 |
feature-packaging | Tape and Reel | feature-pin-count | 14 |
feature-cecc-qualified | feature-esd-protection | ||
feature-military | No | feature-aec-qualified | No |
feature-aec-qualified-number | feature-eccn-code | EAR99 | |
feature-svhc | No | feature-svhc-exceeds-threshold | No |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 6060 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for TUSB213RGYR, guaranteed quotes back within 12hr.
Top Sellers
-
SN65HVD230DR
TI
1000+ $0.403
-
SN75176BP
Texas Instruments
1000+ $0.309
-
PCF8574AN
TI
8-bit 2.5- to 5.5-V I2C/SMBus I/O expander with interrupt
-
MAX232N
Texas Instruments
Dual Transmitter/Receiver RS-232 16-Pin PDIP Tube
-
TCA6424RGJR
Texas Instruments, Inc
24-bit translating 1.65- to 5.5-V I2C/SMBus I/O expander with interrupt, reset & config registers