



Images are for reference only See technical specifications
In Stock: 3,074
IEEE 802.3bt PoE high-power PD interface with advanced startup
TPS2373-4RGWR
Active
The Texas Instruments TPS2373-4RGWR is a Power over Ethernet (PoE) interface controller designed for low-power operation and high efficiency. It features programmable output, thermal shutdown protection, and supports DC-DC conversion and voltage regulation. This device is widely used in PoE applications such as IP cameras, wireless access points, and VoIP phones, as well as other Power Sourcing Equipment (PSE) applications that require power delivery to connected devices over Ethernet cables. The TPS2373-4RGWR operates efficiently even at low currents, making it suitable for remote powering of devices in networks.
The TPS2373-4RGWR features:
It is a Power over Ethernet (PoE) device, commonly used in IP cameras, wireless access points, VoIP phones, and other Power Sourcing Equipment (PSE) applications that require power delivery to connected devices over Ethernet cables.
The package type of TPS2373-4RGWR is VQFN-20.
The TPS2373-4RGWR has a VQFN-20 package, which means it has 20 pins. According to Texas Instruments' documentation, the pinout for the TPS2373-4RGWR is as follows: Pins 1-5: Power-down / Reset / Power-good / Output enable / Error flag Pins 6-10: VCC1 / VCC2 (Voltage regulation) Pins 11-12: COMP / FB (DC-DC conversion and voltage regulation) Pins 13-14: PHASE / PHASE-SYNC (DC-DC conversion and voltage regulation) Pins 15-19: NOT USED Pin 20: GND (Ground) The device requires a 5-pin interface for programming the output signal.
The manufacturer of the TPS2373-4RGWR is Texas Instruments (TI). TI is a multinational semiconductor company that designs, manufactures, and sells semiconductors and other electronic components for use in a wide range of industries, including consumer electronics, computer hardware, automotive systems, medical devices, and telecommunications equipment.
According to the product information, the application areas of TPS2373-4RGWR are:
The equivalent products of TPS2373-4RGWR are:
These devices are Power over Ethernet (PoE) controllers that provide similar functionality to the TPS2373-4RGWR.
Category | Integrated Circuits (ICs)Power Management (PMIC)Power Over Ethernet (PoE) Controllers | Type | Controller (PD) |
---|---|---|---|
Number of Channels | 1 | Power - Max | 90 W |
Internal Switch(s) | Yes | Auxiliary Sense | Yes |
Standards | 802.3at (PoE+), 802.3bt | Voltage - Supply | 0V ~ 57V |
Current - Supply | 20mA | Operating Temperature | -40°C ~ 125°C |
Mounting Type | Surface Mount | Base Product Number | TPS2373 |
Vin (min) (V) | 8 | Vin (max) (V) | 57 |
PoE current limit (min) (mA) | 1550, 1900 | PoE inrush limit (mA) (typ) (A) | 0.2, 0.335, 200, 335 |
rDS(on) per FET (typ) (mΩ) | 100, 300 | PoE standards supported | 802.3bt Type 3, 802.3bt Type 4 |
PD power level | 13W, 25W, 51W, 71W | DC/DC control | PD Only |
Fault response | Auto Retry | Features | Adapter priority, Advanced startup, Automatic MPS, Non-standard POE++ compatible, PG, Primary Side Adapter Priority, Primary-side adapter priority, Programmable UVLO, Thermal shutdown |
Operating temperature range (°C) | -40 to 125 | Rating | Catalog |
Package/Case | VQFN-20 |
1.Q: What package does the Texas Instruments PoE PD controller use?
A: It comes in a 20-pin VQFN-EP (5.15x5.15mm) package with no-lead (QFN) mounting for space-constrained designs.
2.Q: What is the recommended operating temperature range for this Texas Instruments IC?
A: The recommended range is -40°C to +125°C, suitable for industrial and extended-environment applications.
3.Q: Does the Texas Instruments PoE PD controller support industry certifications?
A: Yes, it complies with IEEE 802.3at/bt standards and carries ECCN EAR99 for export control.
4.Q: What is the typical operating power dissipation of the Texas Instruments PD controller?
A: Typical power dissipation depends on load but is optimized for efficiency in IEEE 802.3bt applications, with low standby current.
5.Q: What are the absolute maximum ratings for the Texas Instruments PoE PD controller?
A: Absolute max ratings: 57V input voltage, 125°C junction temperature, and 335mA inrush current. Exceeding these may damage the IC.
6.Q: What applications is the Texas Instruments IEEE 802.3bt PD controller suitable for?
A: It’s ideal for PoE-powered devices like IP cameras, wireless APs, industrial IoT, and high-power LAN equipment requiring up to 90W.
7.Q: What is the pinout configuration for the Texas Instruments VQFN-20 PoE PD controller?
A: The 20-pin VQFN package has pins for input voltage (VIN), ground (GND), power good (PG), classification (CLASS), and auxiliary functions like detection and enable.
8.Q: What are the key features of the Texas Instruments IEEE 802.3bt PoE PD controller?
A: Key features include IEEE 802.3at/bt compliance, 0-57V input range, 90W max output power, 2.2A current limit, and -40°C to +125°C operating temperature.
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
We promise to provide 365 days quality assurance service for all our products.
Returns and exchanges are supported, provided the items remain in their original condition.
12/15/2023
Delivery 15 days to novosibirsk. the seller is well done, i recommend this seller.
09/18/2021
The input was 5V and the maximum output was 4.3V.
11/22/2020
Package received quickly. Good seller. Thank you.
09/22/2020
Very small in size, good quality. need to test it. Thanks
HK warehouse
(HKT)
Call for availability
*Lead times apply to standard orders and are based on business days only. Please contact us for details.
ESD
Tape and Reel
Cut Tape
Tube or Tray