This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

TDP158RSBR

6-Gbps DP++ 1.1 to HDMI 2.0 redriver

Manufacturer:

TI
Mfr.Part #:

TDP158RSBR
Datasheet:

TDP158RSBR Datasheet (PDF)
Type:

Redriver
Protocols:

HDMI
Rating:

Catalog
Speed (max) (Gbps):

6
EDA/CAD Models:

Request Free CAD Models for TDP158RSBR

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

TDP158RSBR General Description

The TDP158 device is an AC-coupled HDMI signal to transition-minimized differential signal (TMDS) Redriver supporting digital video interface (DVI) 1.0 and high-definition multimedia interface (HDMI) 1.4b and 2.0b output signals. The TDP158 supports four TMDS channels and Digital Display Control (DDC) interfaces. The TDP158 supports signaling rates up to 6 Gbps to allow for the highest resolutions of 4k2k60p 24 bits per pixel and up to WUXGA 16-bit color depth or 1080p with higher refresh rates. The TDP158 can be configured to support the HDMI 2.0 standard.

The TDP158 supports dual power supply rails of 1.1 V on V_DD and 3.3 V on V_CC for power reduction. Several methods of power management are implemented to reduce overall power consumption. TDP158 supports fixed receiver EQ gain using I²C or pin strap to compensate for different lengths input cable or board traces.

Key Features

AC-coupled TMDS or DisplayPort™ dual-mode physical layer input to HDMI 2.0b TMDS physical layer output supporting up to 6 Gbps data rate, compatible with HDMI 2.0b electrical parameters
Supporting DisplayPort dual-mode standard version 1.1
Support 4k2k60p and up to WUXGA 16-bit color depth or 1080p with higher refresh rates
Programmable fixed receiver equalizer up to 15.5 dB
Global or independent high speed lane control, pre-emphasis and transmit swing, and slew rate control
I²C or pin strap programmable
Configurable as a DisplayPort redriver through the I²C
Full lane swap on main lanes
Low power consumption
- –200 mW active at 6-Gbps and –8 mW at shutdown state
40-pin, 0.4 mm Pitch, 5 mm × 5 mm, WQFN package, pin compatible to the SN75DP159RSB retimer

Specifications

Type	Redriver	Protocols	HDMI
Rating	Catalog	Speed (max) (Gbps)	6
Number of channels	4	Supply voltage (V)	1.1, 3.3
Operating temperature range (°C)	0 to 85