This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

SN65LVDS1D

630-Mbps single LVDS driver

Manufacturer:

Texas Instruments, Inc
Mfr.Part #:

SN65LVDS1D
Datasheet:

SN65LVDS1D Datasheet (PDF)
Function:

Driver
Protocols:

LVDS
Number of transmitters:

1
Number of receivers:

0
EDA/CAD Models:

Request Free CAD Models for SN65LVDS1D

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

SN65LVDS1D General Description

The SN65LVDS1, SN65LVDS2, and SN65LVDT2 devices are single, low-voltage, differential line drivers and receivers in the small-outline transistor package. The outputs comply with the TIA/EIA-644 standard and provide a minimum differential output voltage magnitude of 247 mV into a 100-Ω load at signaling rates up to 630 Mbps for drivers and 400 Mbps for receivers.

When the SN65LVDS1 device is used with an LVDS receiver (such as the SN65LVDT2) in a point-to-point connection, data or clocking signals can be transmitted over printed-circuit board traces or cables at very high rates with very low electromagnetic emissions and power consumption. The packaging, low power, low EMI, high ESD tolerance, and wide supply voltage range make the device ideal for battery-powered applications.

The SN65LVDS1, SN65LVDS2, and SN65LVDT2 devices are characterized for operation from –40°C to 85°C.

Key Features

Meets or Exceeds the ANSI TIA/EIA-644 Standard
Designed for Signaling Rates¹ up to:
- 630 Mbps for Drivers
- 400 Mbps for Receivers
Operates From a 2.4-V to 3.6-V Supply
Available in SOT-23 and SOIC Packages
Bus-Terminal ESD Exceeds 9 kV
Low-Voltage Differential Signaling With Typical Output
Voltages of 350 mV Into a 100-Ω Load
Propagation Delay Times
- 1.7-ns Typical Driver
- 2.5-ns Typical Receiver
Power Dissipation at 200 MHz
- 25 mW Typical Driver
- 60 mW Typical Receiver
LVDT Receiver Includes Line Termination
Low Voltage TTL (LVTTL) Level Driver Input Is 5-V
Tolerant
Driver Is Output High-Impedance with V_CC< 1.5 V
Receiver Output and Inputs are High-Impedance With
V_CC< 1.5 V
Receiver Open-Circuit Fail Safe
Differential Input Voltage Threshold Less Than 100 mV

Specifications

Function	Driver	Protocols	LVDS
Number of transmitters	1	Number of receivers	0
Supply voltage (V)	3.3	Signaling rate (MBits)	630
Input signal	LVTTL	Output signal	LVDS
Rating	Catalog	Operating temperature range (°C)	-40 to 85
feature-function	Driver	feature-number-of-drivers	0
feature-number-of-receivers	1	feature-number-of-elements-per-chip	1
feature-transmission-data-rate-mbps	630	feature-maximum-propagation-delay-time-ns	3.1
feature-input-signal-type	LVDS	feature-differential-input-low-threshold-voltage-v	-0.1(Min)
feature-differential-input-high-threshold-voltage-v	0.1(Max)	feature-maximum-differential-output-voltage-v	0.454
feature-maximum-input-current-ua	20	feature-supplier-temperature-grade
feature-packaging	Tube	feature-rad-hard
feature-pin-count	8	feature-cecc-qualified	No
feature-esd-protection	Yes	feature-escc-qualified
feature-military	No	feature-aec-qualified	No
feature-aec-qualified-number		feature-eccn-code	EAR99
feature-svhc	No	feature-svhc-exceeds-threshold	No