This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

SN65LVDS051PWRQ1

Automotive catalog high-speed differential line transceiver

Manufacturer:

Texas Instruments, Inc
Mfr.Part #:

SN65LVDS051PWRQ1
Datasheet:

SN65LVDS051PWRQ1 Datasheet (PDF)
Series:

Automotive, AEC-Q100, 65LVDS
Type:

Transceiver
Protocol:

LVDS
Number of Drivers/Receivers:

2/2
EDA/CAD Models:

Request Free CAD Models for SN65LVDS051PWRQ1

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

SN65LVDS051PWRQ1 General Description

The SN65LVDS180, SN65LVDS050, and SN65LVDS051 are differential line drivers and receivers that use low-voltage differential signaling (LVDS) to achieve signaling rates as high as 400 Mbps. The TIA/EIA-644 standard compliant electrical interface provides a minimum differential output voltage magnitude of 247 mV into a 100-Ω load and receipt of 50-mV signals with up to 1 V of ground potential difference between a transmitter and receiver.

The intended application of this device and signaling technique is for point-to-point baseband data transmission over controlled impedance media of approximately 100-Ω characteristic impedance. The transmission media may be printed-circuit board traces, backplanes, or cables. (Note: The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media, the noise coupling to the environment, and other application specific characteristics).

The devices offer various driver, receiver, and enabling combinations in industry standard footprints. Since these devices are intended for use in simplex or distributed simplex bus structures, the driver enable function does not put the differential outputs into a high-impedance state but rather disconnects the input and reduces the quiescent power used by the device. (For these functions with a high-impedance driver output, see the SN65LVDM series of devices.) All devices are characterized for operation from −40°C to 85°C.

Key Features

Qualified for Automotive Applications
ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015;
Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
Meets or Exceeds the Requirements of ANSI TIA/EIA-644-1995 Standard
Signaling Rates up to 400 Mbps
Bus-Terminal ESD Exceeds 12 kV
Operates From a Single 3.3-V Supply
Low-Voltage Differential Signaling With Typical Output Voltages of 350 mV and a
100-Ω Load
Propagation Delay Times
- Driver: 1.7 ns Typ
- Receiver: 3.7 ns Typ
Power Dissipation at 200 MHz
- Driver: 25 mW Typical
- Receiver: 60 mW Typical
LVTTL Input Levels Are 5-V Tolerant
Receiver Maintains High Input Impedance With V_CC < 1.5 V
Receiver Has Open-Circuit Fail Safe

Specifications

Category	Integrated Circuits (ICs)InterfaceDrivers, Receivers, Transceivers	Series	Automotive, AEC-Q100, 65LVDS
Type	Transceiver	Protocol	LVDS
Number of Drivers/Receivers	2/2	Duplex	Full
Data Rate	100Mbps	Voltage - Supply	3V ~ 3.6V
Operating Temperature	-40°C ~ 85°C	Mounting Type	Surface Mount
Base Product Number	65LVDS051	Function	Transceiver
Protocols	LVDS	Number of transmitters	2
Number of receivers	2	Supply voltage (V)	3.3
Signaling rate (MBits)	400	Input signal	LVDS, LVTTL
Output signal	LVDS, LVTTL	Rating	Automotive
Operating temperature range (°C)	-40 to 85