This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

SN65LVCP408PAPT

8x8 4.25-Gbps crosspoint switch

Manufacturer:

Texas Instruments, Inc
Mfr.Part #:

SN65LVCP408PAPT
Datasheet:

SN65LVCP408PAPT Datasheet (PDF)
Function:

Crosspoint
Protocols:

CML, VML
Number of transmitters:

8
Number of receivers:

8
EDA/CAD Models:

Request Free CAD Models for SN65LVCP408PAPT

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

SN65LVCP408PAPT General Description

The SN65LVCP408 is a 8 × 8 non-blocking crosspoint switch in a flow-through pin-out allowing for ease in PCB layout. VML signaling is used to achieve a high-speed data throughput while using low power. Each of the output drivers includes a 8:1 multiplexer to allow any input to be routed to any output. Internal signal paths are fully differential to achieve the high signaling speeds while maintaining low signal skews. The SN65LVCP408 incorporates 100- termination resistors for those applications where board space is a premium. Built-in transmit pre-emphasis and receive equalization for superior signal integrity performance.

The SN65LVCP408 is characterized for operation from –40°C to 85°C. (See operating free air condition requirements)

Key Features

Up to 4.25 Gbps Operation
Non-Blocking Architecture Allows Each
Output to be Connected to Any Input
30 ps of Deterministic Jitter
Selectable Transmit Pre-Emphasis Per Lane
Selectable Receive Equalization
Available Packaging 64 Pin QFP
Propagation Delay Times: 500 ps Typical
Inputs Electrically Compatible With
CML Signal Levels
Operates From a Single 3.3-V Supply
Ability to 3-STATE Outputs
Integrated Termination Resistors
I²C™ Control Interface
APPLICATIONS
- Clock Buffering/Clock MUXing
- Wireless Base Stations
- High-Speed Network Routing
- Telecom/Datacom
- XAUI 802.3ae Protocol Backplane Redundancy

PowerPAD is a trademark of Texas Instruments.
I²C is a trademark of Philips Electronics.

Specifications

Function	Crosspoint	Protocols	CML, VML
Number of transmitters	8	Number of receivers	8
Supply voltage (V)	3.3	Signaling rate (MBits)	4250
Input signal	CML, VML	Output signal	VML
Rating	Catalog	Operating temperature range (°C)	-40 to 85
feature-type		feature-logic-function
feature-array-configuration	8x8	feature-configuration
feature-number-of-arrays	1	feature-number-of-inputs-per-chip
feature-number-of-elements-per-chip		feature-number-of-outputs-per-chip
feature-polarity		feature-maximum-data-rate-gbps	4.25
feature-logic-family		feature-packaging	Tape and Reel
feature-rad-hard		feature-pin-count	64
feature-cecc-qualified	No	feature-esd-protection
feature-escc-qualified		feature-military	No
feature-aec-qualified	No	feature-aec-qualified-number
feature-auto-motive	No	feature-p-pap	No
feature-eccn-code	5A991b.1.	feature-svhc	Yes
feature-svhc-exceeds-threshold	No