Payment Method
SN65176BP
Differential Bus Transceiver
-
Manufacturer:
-
Mfr.Part #:
SN65176BP
-
Datasheet:
-
Type:
Transceiver
-
Protocol:
RS422, RS485
-
Number of Drivers/Receivers:
1/1
-
Duplex:
Half
-
EDA/CAD Models:
Availability: 7865 PCS
Please fill in the short form below and we will provide you the quotation immediately.
SN65176BP General Description
The SN65176B and SN75176B differential bus transceivers are designed for bidirectional data communication on multipoint bus transmission lines. They are designed for balanced transmission lines and meet ANSI Standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27.
The SN65176B and SN75176B devices combine a 3-state differential line driver and a differential input line receiver, both of which operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, that can be connected together externally to function as a direction control. The driver differential outputs and the receiver differential inputs are connected internally to form differential input/output (I/O) bus ports that are designed to offer minimum loading to the bus when the driver is disabled or VCC = 0. These ports feature wide positive and negative common-mode voltage ranges, making the device suitable for party-line applications.
The driver is designed for up to 60 mA of sink or source current. The driver features positive and negative current limiting and thermal shutdown for protection from line-fault conditions. Thermal shutdown is designed to occur at a junction temperature of approximately 150°C. The receiver features a minimum input impedance of 12 kΩ, an input sensitivity of ±200 mV, and a typical input hysteresis of 50 mV.
Key Features
- Bidirectional transceivers
- Meet or exceed the requirements of ANSI standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27
- Designed for multipoint transmission on long bus lines in noisy environments
- 3-State driver and receiver outputs
- Individual driver and receiver enables
- Wide positive and negative input/output bus voltage ranges
- ± 60-mA Maximum driver output capability
- Thermal shutdown protection
- Driver positive and negative current limiting
- 12-kΩ Minimum Receiver Input Impedance
- ± 200-mV Receiver input sensitivity
- 50-mV Typical receiver input hysteresis
- Operate from single 5-V supply
Specifications
Category | Integrated Circuits (ICs)InterfaceDrivers, Receivers, Transceivers | Series | - |
Type | Transceiver | Protocol | RS422, RS485 |
Number of Drivers/Receivers | 1/1 | Duplex | Half |
Receiver Hysteresis | 50 mV | Data Rate | - |
Voltage - Supply | 4.75V ~ 5.25V | Operating Temperature | -40°C ~ 105°C |
Mounting Type | Through Hole | Base Product Number | 65176 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 7865 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | $0.975 | $0.98 |
10+ | $0.836 | $8.36 |
30+ | $0.758 | $22.74 |
100+ | $0.674 | $67.40 |
500+ | $0.635 | $317.50 |
1000+ | $0.617 | $617.00 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for SN65176BP, guaranteed quotes back within 12hr.
Top Sellers
-
SN65HVD230DR
TI
1000+ $0.403
-
SN75176BP
Texas Instruments
1000+ $0.309
-
PCF8574AN
TI
8-bit 2.5- to 5.5-V I2C/SMBus I/O expander with interrupt
-
MAX232N
Texas Instruments
Dual Transmitter/Receiver RS-232 16-Pin PDIP Tube
-
TCA6424RGJR
Texas Instruments, Inc
24-bit translating 1.65- to 5.5-V I2C/SMBus I/O expander with interrupt, reset & config registers
Ordered on march 31, received on may 7. The order was assembled, several positions from this seller. Everything checked. Everything works and corresponds to the description. The leds shine, the charging controllers work stably, with a voltage of 4,2 volts turn off the battery, the siren is amazingly similar to the police, especially if pospername with the selection of the resistor. In a word, the seller respect, what else i will need to order from him.