This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

PTN5150HXMP +BOM

USB Type-C Rev 1.1 CC-Logic, Industry standard pinout

Manufacturer:

NXP Semiconductor
Mfr.Part #:

PTN5150HXMP
Datasheet:

PTN5150HXMP Datasheet (PDF)
Programmable:

Not Verified
Protocol:

USB
Function:

Controller
Interface:

USB
EDA/CAD Models:

Request Free CAD Models for PTN5150HXMP

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

PTN5150HXMP General Description

PTN5150 is a small thin low power CC Logic chip supporting the USB Type-C connector application with Configuration Channel (CC) control logic detection and indication functions. The features of PTN5150 enable USB Type-C connector to be used in both host and device ends of the Type-C cable. It can support Type-C to USB legacy cables and adapters defined in USB Type-C Spec. PTN5150 can work autonomously, or can connect to a controller through I2C-bus interface.PTN5150 can be configured to dual role, host, or device mode through external configuration pin or through I2C interface. The CC control logic detection and indication block supports 3 current modes (default current 500 mA/900 mA, medium current 1.5 A and high current 3.0 A) in DFP advertisement's perspective. When in UFP advertisement's perspective, the control logic will detect if a DFP with different pull-up Rp current source is connected. In addition, it will detect if Ra is present on CC1/CC2 pins. Upon detection of plug orientation, pin ID will indicate if PTN5150 is working under either host role or device role, and other status will also be reflected in I2C registers.

Key Features

USB Power Delivery (USB PD): The PTN5150HXMP supports USB PD, which enables intelligent and dynamic power negotiation between the charger and the connected device.
Fast Charging: This controller supports fast-charging technologies, which can significantly reduce charging times for compatible devices.
Type-C Connector Compatibility: It is designed to work with USB Type-C connectors, which are commonly used in modern electronic devices for data and power transfer.
Intelligent Power Management: The PTN5150HXMP can monitor and manage power delivery based on the device's power requirements, ensuring safe and efficient charging.
Overcurrent and Overvoltage Protection: The controller includes protection mechanisms to prevent overcurrent and overvoltage situations, which helps safeguard connected devices and chargers.
Programmable Profiles: It may support programmable profiles, allowing manufacturers to configure the controller for specific device and charger requirements.
Integrated Circuit: This IC may include various functions and features necessary for USB PD power delivery, such as USB Type-C detection and power negotiation.

Application

Smartphones and Tablets: USB PD controllers are used in mobile devices to support fast charging and optimize power delivery.
Laptops and Ultrabooks: In modern laptops, ultrabooks, and 2-in-1 devices for efficient charging and power management.
Power Banks: For USB PD-compliant power banks that can charge devices quickly and efficiently.
Chargers and Power Adapters: USB PD controllers are integrated into wall chargers, car chargers, and power adapters to support fast-charging standards.
Monitors and Docking Stations: USB PD controllers enable monitors and docking stations to provide power and connectivity to laptops and other devices through a single cable.
Automotive Charging: In electric and hybrid vehicles for charging support through USB Type-C connectors.
Industrial and IoT Devices: In various industrial and Internet of Things (IoT) applications for efficient power management.
Consumer Electronics: In a wide range of consumer electronics products, including cameras, gaming consoles, and more.

Specifications

Category	Integrated Circuits (ICs)InterfaceControllers	Series	-
Programmable	Not Verified	Protocol	USB
Function	Controller	Interface	USB
Standards	-	Voltage - Supply	2.7V ~ 5.5V
Current - Supply	-	Operating Temperature	-40°C ~ 85°C
Base Product Number	PTN5150	Product Category	USB Interface IC
Product	USB Controllers	Mounting Style	SMD/SMT
Standard	USB-C 1.0	Supply Voltage - Min	2.7 V
Supply Voltage - Max	5.5 V	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 85 C	Moisture Sensitive	Yes
Product Type	USB Interface IC	Factory Pack Quantity	10000
Subcategory	Interface ICs	Part # Aliases	935305812528
Unit Weight	0.000088 oz