This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

PTN3392BS +BOM

Versatility at Its Best, DisplayPort Meets VG

Manufacturer:

NXP Semiconductor
Mfr.Part #:

PTN3392BS
Datasheet:

PTN3392BS Datasheet (PDF)
Standby Current [typ] (µA):

5
Data Transfer Rate (Mb/s):

5400
RGB Output:

8-bit per component
Crystal Oscillator:

27 MHz
EDA/CAD Models:

Request Free CAD Models for PTN3392BS

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

PTN3392BS General Description

The PTN3392 is a DisplayPort to VGA adapter IC designed to connect a DisplayPort source to a VGA sink. The PTN3392 integrates a DisplayPort receiver and a high-speed triple video digital-to-analog converter that supports display resolutions from VGA to WUXGA. The PTN3392 supports either one or two DisplayPort v1.1a lanes operating at either 2.7 Gbit/s or 1.62 Gbit/s per lane. The PTN3392 has ‘Flash-over-AUX’ capability enabling simple firmware upgradability in the field.The PTN3392 supports I2C-bus over AUX per DisplayPort v1.1a specification, and bridges the VESA DDC channel to the DisplayPort Interface.The PTN3392 is designed for single supply and minimizes application costs. It can be powered directly from the DisplayPort source side 3.3 V supply without a need for additional core voltage regulator. The VGA output is powered down when there is no valid DisplayPort source data being transmitted. The PTN3392 also aids in monitor detection by performing load sensing and reporting sink connection status to the source.

Key Features

VESA compliant DisplayPort v1.1a converter
Dongle PC accessory
Dongle connected to PC DisplayPort output and connected to RGB monitor via VGA cable
PTN3392 is powered by the DP_PWR pin on the DisplayPort connector
Desktop and notebook computers
Notebook docking stations
Target Applications
Dongle PC accessory
Dongle connected to PC DisplayPort output and connected to RGB monitor via VGA cable
PTN3392 is powered by the DP_PWR pin on the DisplayPort connector
Desktop and notebook computers
Notebook docking stations

Specifications

Standby current [typ] (µA)	5	Data transfer rate (Mb/s)	5400
RGB Output	8-bit per component	Crystal oscillator	27 MHz
Output voltage (black-to-white) Vp-p typ	0.7	Supply current	150
Pixel frequency	240	Inputs	2-lane DisplayPort with AUX channel
Early Failure Rate	0	Failures in time	4
Mean time between failures	250000000