Payment Method
NLSX5014MUTAG
Voltage Level Translator Bidirectional 1 Circuit 4 Channel 100Mbps 12-UQFN (1.7x2)
-
Manufacturer:
-
Mfr.Part #:
NLSX5014MUTAG
-
Datasheet:
-
Case Outline:
948G-01
-
MSL Temp (°C):
260
-
Container Type:
REEL
-
EDA/CAD Models:
Availability: 6508 PCS
Please fill in the short form below and we will provide you the quotation immediately.
NLSX5014MUTAG General Description
The NLSX5014 is a 4-bit configurable dual-supply autosensing bidirectional level translator that does not require a direction control pin. The IO Vcc- and IO VL-ports are designed to track two different power supply rails, VCC and VL respectively. Both the VCC and the VL supply rails are configurabel from 0.9 V to 4.5 V. This allows a logic signal on the VL side to be translated to either a higher or a lower logic signal voltage on the VCC side, and vice-versa. The NLSX5014 offers the feature that the values of the VCC and VL supplies are indenpendent. Design flexibility is maximized because VL can be set to a value either greater than or less than the VCC supply. In contrast, the majority of competitive auto sense translators have a restriction that the value of the VL supply must be equal to less than (VCC-0.4) V. The NLSX5014 has high output current capability, which allows the translator to drive high capacitive loads such as most high frequency EMI filters. Another feature of the NLSX5014 is that each IO_VLn and IO_VCCn channel can function as either an input or an output. An Output Enable (EN) input is avaialbe to reduce the power consumption. The EN pin can be used to disable both I/O ports by putting them in 3-state which significantly reduces the supply.
Key Features
- Wide VCC, VL operating range: 0.9 V to 4.5 V
- VL and VCC are independent. VL may be greater than, equal to, or less than VCC
- High 100 pF capacitive drive capability
- High speed with 140 Mb/s guaranteed date rate for VCC, VL > 1.8 V
- Low bit to bit skew
- Overvoltage tolerant Enable and I/O pins
- Nonpreferential Power up sequencing
- Power Off protection
- Small packaging: 1.7 mm x 2.0 mm UQFN-12, SOIC-14, TSSOP-14
- These are PbFree devices
Application
- Mobile Phones, PDAs, Other Portable Devices
Specifications
Status | Active | Case Outline | 948G-01 |
MSL Temp (°C) | 260 | Container Type | REEL |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
NLSX5014MUTAG Datasheet PDF
NLSX5014MUTAG PDF Preview
Availability: 6508 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for NLSX5014MUTAG, guaranteed quotes back within 12hr.
Top Sellers
-
SN74LS04N
Texas Instruments
1000+ $0.342
-
MC14584BCP
Onsemi
The MC14584BCP is a CMOS hex inverter chip with Schmitt trigger inputs
-
NC7WZ17P6X
Onsemi
NC7WZ17P6X TinyLogic UHS Dual Buffer with Schmitt Trigger Inputs 3000 REEL
-
MC14011BCP
Onsemi
Quad 2-Input NAND
-
NC7WZ14P6X
ON
NC7WZ14P6X is a 2-element CMOS inverter Schmitt trigger that is housed in a 6-pin SC-88 package and comes on tape and reel
The parcel came, everything works fine