Payment Method
MMC2107CFCAG33 +BOM
MMC2107CFCAG33 is a microcontroller with 128KFLASH and 8KRAM storage capacity
LQFP-144-
Manufacturer:
-
Mfr.Part #:
MMC2107CFCAG33
-
Datasheet:
-
Series:
MMC2107
-
Mounting Style:
SMD/SMT
-
Core:
M-CORE
-
Program Memory Size:
128 kB
-
EDA/CAD Models:
Availability: 5272 PCS
Please fill in the short form below and we will provide you the quotation immediately.
MMC2107CFCAG33 General Description
Furthermore, the MMC2107CFCAG33 is designed to withstand extreme conditions, operating reliably over a wide temperature range. This resilience makes it an ideal choice for automotive applications where durability is essential. From high-performance computing to robust security features, this MCU offers a comprehensive solution for automotive design challenges, setting new standards for reliability and performance in the industry
Key Features
- Features of the MMC2107 include:
- MCORE M210 integer processor:
- – 32-bit reduced instruction set computer (RISC) architecture
- – Low power and high performance
- OnCE™ debug support
- On-chip 128-Kbyte FLASH:
- – Motorola’s one transistor, CDR MoneT(1) FLASH bit cell
- – Page mode (2111) read access
- – External VPP required for programming
- – 16-K block size
- On-chip, 8-Kbyte static random-access memory (SRAM):
- – One clock per access (including bytes, half-words, and words)
- – Byte, half-word (16 bits), and word (32 bits) read/write accesses
- – Standby power supply support
- Serial peripheral interface (SPI):
- – Master mode and slave mode
- – Wired-OR mode
- – Slave select output
- – Mode fault error flag with CPU interrupt capability
- – Double-buffered operation
- – Serial clock with programmable polarity and phase
- – Control of SPI operation during wait mode
- – Reduced drive control
- Two serial communications interfaces (SCI):
- – Full-duplex operation
- – Standard mark/space non-return-to-zero (NRZ) format
- – 13-bit baud rate selection
- – Programmable 8-bit or 9-bit data format
- – Separately enabled transmitter and receiver
- – Separate receiver and transmitter CPU interrupt requests
- – Programmable transmitter output polarity
- – Two receiver wakeup methods (idle line and address mark)
- – Interrupt-driven operation with eight flags
- – Receiver framing error detection
- – Hardware parity checking
- – 1/16 bit-time noise detection
- – General-purpose input/output port
- Two timers:
- – Four 16-bit input capture/output compare channels
- – 16-bit architecture
- – 16-bit pulse accumulator
- – Pulse widths variable from microseconds to seconds
- – Prescaler
- – Toggle-on-overflow feature for pulse-width modulator (PWM) generation
- – Timer port pullups enabled on reset
- Queued analog-to-digital converter (QADC):
- – Eight analog input channels
- – 10-bit resolution ±2 counts accuracy
- – Minimum 7 µs conversion time
- – Internal sample and hold
- – Programmable input sample time for various source impedances
- – Two conversion command queues with a total of 64 entries
- – Subqueues possible using pause mechanism
- – Queue complete and pause software interrupts available on both queues
- – Queue pointers indicate current location for each queue
- – Automated queue modes initiated by:
- External edge trigger and gated trigger
- Periodic/interval timer, within queued analog-to-digital converter (QADC) module {queue1 and queue2}
- Software command
- – Single-scan or continuous-scan of queues
- – Output data readable in three formats:
- Right-justified unsigned
- Left-justified signed
- Left-justified unsigned
- – Unused analog channels can be used as digital input/output (I/O)
- – Minimum pin set configuration implemented (Continue)
Specifications
Product Category | 32-bit Microcontrollers - MCU | Series | MMC2107 |
Mounting Style | SMD/SMT | Core | M-CORE |
Program Memory Size | 128 kB | Data RAM Size | 8 kB |
Data Bus Width | 32 bit | Maximum Clock Frequency | 33 MHz |
Number of I/Os | 72 I/O | Supply Voltage - Min | 2.7 V |
Supply Voltage - Max | 3.6 V | Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 85 C | Packaging | [ "Tray" ] |
Data ROM Size | 128 kB | Data ROM Type | Flash/EEPROM |
Height | 1.4 mm | Interface Type | SCI, SPI |
Length | 20 mm | Moisture Sensitive | Yes |
Number of Timers/Counters | 2 Timer | Processor Series | MMC2107 |
Product Type | 32-bit Microcontrollers - MCU | Program Memory Type | EEPROM, Flash |
Factory Pack Quantity | 300 | Subcategory | Microcontrollers - MCU |
Width | 20 mm | Unit Weight | 0.046530 oz |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 5,272
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for MMC2107CFCAG33, guaranteed quotes back within 12hr.
Top Sellers
-
74HC04D
Toshiba
5000+ $0.072
-
TDA8947J
NXP
Audio Amplifiers 3/4 CHANNEL AUDIO AMPLIFIER
-
TDA8920BJ
Nxp
Experience crystal-clear sound quality and robust power handling with this efficient Class D amplifier
-
TDA8954J
Nxp
Plastic SOT411-1 PZFM23 audio amplifier
-
HEF40106BT
Nexperia
Inverter Schmitt Trigger 6-Element CMOS 14-Pin SO