This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

MCP4651-503E/ST +BOM

Digital Potentiometer 50kOhm 257POS Volatile Linear Automotive AEC-Q100 14-Pin TSSOP Tube

Manufacturer:

Microchip Technology, Inc
Mfr.Part #:

MCP4651-503E/ST
Datasheet:

MCP4651-503E/ST Datasheet (PDF)
Series:

MCP4651
Resistance:

50 kOhms
Number of POTs:

Dual
Taps per POT:

256
EDA/CAD Models:

Request Free CAD Models for MCP4651-503E/ST

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

MCP4651-503E/ST General Description

DGTL POT, 50K, 256TAPS, 14-TSSOP; End To End Resistance:50kohm; Track Taper:Linear; No. of Steps:257; Resistance Tolerance:± 20%; Supply Voltage Range:1.8V to 5.5V; Control Interface:Serial, I2C; No. of Pots:Dual; Temperature Coefficient:50ppm/°C; Potentiometer IC Case Style:TSSOP; No. of Pins:14; Operating Temperature Range:-40°C to +125°C; SVHC:No SVHC (20-Jun-2011); Base Number:4651; Memory Type:Volatile; Track Resistance:75ohm

Key Features

Potentiometer or Rheostat configuration options
Resistor Network Resolution
8-bit: 256 Resistors (257 Steps)
RAB Resistances options of:
5kΩ
10kΩ
50kΩ
100kΩ
Zero-Scale to Full-Scale Wiper operation
Low Wiper Resistance: 75Ω (typ.)
Low Tempco:
Absolute (Rheostat): 50 ppm typical(0°C to 70°C)
Ratiometric (Potentiometer): 15 ppm typical
I2C™Compatible Serial interface
100 kHz
400 kHz
3.4 MHz
Brown-out reset protection (1.5V typical)
Serial Interface Inactive current (2.5 uA typ.)
High-Voltage Tolerant Digital Inputs: Up to 12.5V
Wide Operating Voltage:
2.7V to 5.5V - Device Characteristics Specified
1.8V to 5.5V - Device Operation
Wide Bandwidth (-3dB) Operation:
2 MHz (typ.) for 5.0 kΩ device
Extended temperature range (-40°C to +125°C)
AEC-Q100 Grade 1 quarlified

Microchip Technology, Inc Original Stock

Specifications

Product Category:	Digital Potentiometer ICs	Series:	MCP4651
Resistance:	50 kOhms	Number of POTs:	Dual
Taps per POT:	256	Wiper Memory:	Volatile
Digital Interface:	Serial (2-Wire, I2C)	Operating Supply Voltage:	2.5 V, 3.3 V, 5 V
Operating Supply Current:	2.5 uA	Minimum Operating Temperature:	- 40 C
Maximum Operating Temperature:	+ 125 C	Mounting Style:	PCB Mount
Packaging:	Tube	Height:	1 mm
Length:	5 mm	Supply Type:	Single
Termination Style:	SMD/SMT	Width:	4.4 mm
Product Type:	Digital Potentiometer ICs	Factory Pack Quantity:	96
Subcategory:	Digital Potentiometer ICs	Supply Voltage - Max:	5.5 V
Supply Voltage - Min:	1.8 V	Unit Weight:	0.004949 oz
Tags	MCP4651-5, MCP4651, MCP465, MCP46, MCP4, MCP