This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

MC100EP446FAG

Serial to Parallel Converter, 3.3 V / 5 V, 8-Bit, CMOS / ECL / TTL Data Input

Manufacturer:

ON Semiconductor, LLC
Mfr.Part #:

MC100EP446FAG
Datasheet:

MC100EP446FAG Datasheet (PDF)
Case Outline:

561AB
MSL Temp (°C):

260
Container Type:

JTRAY
Operating Supply Voltage:

3.3 V, 5 V
EDA/CAD Models:

Request Free CAD Models for MC100EP446FAG

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

MC100EP446FAG General Description

The MC10/100EP446 is an integrated 8-bit parallel to serial data converter. The device is designed with unique circuit topology to operate for NRZ data rates up to 3.2 Gb/s. The conversion sequence from parallel data into a serial data stream is from bit D0 to D7. The parallel input pins D0-D7 are configurable to be threshold controlled by CMOS, ECL, or TTL level signals. The serial data rate output can be selected at internal clock data rate or twice the internal data rate using the CKSEL pin.

Control pins are provided to reset (SYNC) and disable internal clock circuitry (CKEN). In either CKSEL modes, the internal flip-flops are triggered on the rising edge for CLK and the multiplexers are switched on the falling edge of CLK, therefore, all associated specification limits are referenced to the negative edge of the clock input. Additionally, V_BB pin is provided for single-ended input condition.

The 100 Series devices contain temperature compensation network.

Key Features

3.2 Gb/s Typical Data Rate Capability
Differential Clock and Serial Inputs
V_BB Output for Single-ended Input Applications
Asynchronous Data Reset (SYNC)
PECL Mode Operating Range: V_CC = 3.0 V to 5.5 V with V_EE = 0 V
NECL Mode Operating Range: V_CC = 0 V with V_EE = -3.0 V to -5.5 V
Open Input Default State
Safety Clamp on Inputs
Parallel Interface Can Support PECL, TTL and CMOS
Pb-Free Packages are Available

Application

Parallel to Serial Conversion

Specifications

Status	Active	Case Outline	561AB
MSL Temp (°C)	260	Container Type	JTRAY
Product Category	Serial to Parallel Logic Converters	Operating Supply Voltage	3.3 V, 5 V
Supply Voltage - Min	3 V	Supply Voltage - Max	5.5 V
Mounting Style	SMD/SMT	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 85 C	Height	1.45 mm
Length	7 mm	Logic Type	CMOS, ECL, TTL
Maximum Operating Frequency	3.4 GHz	Minimum Operating Frequency	1.6 GHz
Moisture Sensitive	Yes	Operating Supply Current	110 mA
Output Type	ECL	Product Type	Serial to Parallel Logic Converters
Propagation Delay Time	800 ps	Series	MC100EP446
Factory Pack Quantity	250	Subcategory	Logic ICs
Supply Current - Max	145 mA	Width	7 mm
Part # Aliases	MC100EP445MNG	Unit Weight	0.027302 oz