This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

MAX16056ATA26+

Supervisor Push-Pull, Totem Pole 1 Channel 8-TDFN (3x3)

Manufacturer:

Analog Devices Inc.
Mfr.Part #:

MAX16056ATA26+
Datasheet:

MAX16056ATA26+ Datasheet (PDF)
Factory Pack Quantity:

100

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

MAX16056ATA26+ General Description

The MAX16056–MAX16059 are ultra-low-current 125nA (typ) microprocessor (µP) supervisory circuits that monitor a single system supply voltage. These devices assert an active-low reset signal whenever the V_CC supply voltage drops below the factory trimmed reset threshold, manual reset is pulled low, or the watchdog timer runs out (MAX16056/MAX16058). The reset output remains asserted for an adjustable reset timeout period after V_CC rises above the reset threshold. Factory-trimmed reset threshold voltages are offered from 1.575V to 4.625V in approximately 100mV increments (see Table 1 in the full data sheet).

Key Features

Reduced Power Requirements
- Ultra-Low 125nA (typ) Supply Current
- 1.1V to 5.5V Operating Supply Range
Configurable Circuit Enables Flexible Designs
- Factory-Set Reset Threshold Options from 1.575V to 4.625V in Approximately 100mV Increments
- Capacitor-Adjustable Reset Timeout
- Capacitor-Adjustable Watchdog Timeout (MAX16056/MAX16058)
- Watchdog Timer Capacitor Open Detect Function
- Optional Watchdog Disable Function (MAX16056/MAX16058)
- Manual-Reset Input
- Push-Pull or Open-Drain Active-Low RESET Output Options
Integrated Features Increases System Robustness
- Power-Supply Transient Immunity
- Guaranteed Active-Low RESET Valid for V_CC ≥ 1.1V
Saves Board Space
- 3mm x 3mm TDFN Package