Payment Method
LSF0204DRUTR
4-Bit Bidirectional Multi-Voltage Level Translator for Open-Drain & Push-Pull
-
Manufacturer: Texas Instruments, Inc
-
Mfr.Part #: LSF0204DRUTR
-
Datasheet: LSF0204DRUTR Datasheet (PDF)
-
Translator Type: Voltage Level
-
Channel Type: Bidirectional
-
Number of Circuits: 1
-
Channels per Circuit: 4
-
EDA/CAD Models: Request Free CAD Models for LSF0204DRUTR
Availability: 3596 PCS
Please fill in the short form below and we will provide you the quotation immediately.
LSF0204DRUTR General Description
The LSF family consists of bidirectional voltage level translators that operate from 0.8 V to 4.5 V (Vref_A) and 1.8 V to 5.5 V (Vref_B). This range allows for bidirectional voltage translations between 0.8 V and 5.0 V without the need for a direction terminal in open-drain or push-pull applications. The LSF family supports level translation applications with transmission speeds greater than 100 MHz for open-drain systems that utilize a 15-pF capacitance and 165-Ω pull-up resistor.
When the An or Bn port is LOW, the switch is in the ON-state and a low resistance connection exists between the An and Bn ports. The low Ron of the switch allows connections to be made with minimal propagation delay and signal distortion. The voltage on the A or B side will be limited to Vref_A and can be pulled up to any level between Vref_A and 5 V. This functionality allows a seamless translation between higher and lower voltages selected by the user without the need for directional control.
Key Features
- Provides bidirectional voltage translation with no direction terminal
- Supports up to 100-MHz up translation and greater than 100-MHz down translation at ≤ 30-pF capacitor load and up to 40-MHz up/down translation at 50-pF capacitor load
- Supports Ioff, partial power-down mode (refer to Feature Description)
- Allows bidirectional voltage level translation between
- 0.8 V ↔ 1.8, 2.5, 3.3, 5 V
- 1.2 V ↔ 1.8, 2.5, 3.3, 5 V
- 1.8 V ↔ 2.5, 3.3, 5 V
- 2.5 V ↔ 3.3, 5 V
- 3.3 V ↔ 5 V
- Low standby current
- 5 V Tolerance I/O port to support TTL
- Low Ron provides less signal distortion
- High-impedance I/O terminals for EN = Low
- Flow-through pinout for easy PCB trace routing
- Latch-up performance exceeds 100 mA per JESD17
- –40°C to 125°C operating temperature range
- ESD performance tested per JESD 22
- 2000-V human-body model (A114-B, Class II)
- 200-V machine model (A115-A)
- 1000-V charged-device model (C101)
Specifications
Category | Integrated Circuits (ICs)LogicTranslators, Level Shifters | Mfr | Texas Instruments |
Series | - | Package | Tape & Reel (TR)Cut Tape (CT)Digi-Reel® |
Product Status | Active | Translator Type | Voltage Level |
Channel Type | Bidirectional | Number of Circuits | 1 |
Channels per Circuit | 4 | Voltage - VCCA | 0.8 V ~ 4.5 V |
Voltage - VCCB | 1.8 V ~ 5.5 V | Input Signal | - |
Output Signal | - | Output Type | Open Drain, Push-Pull |
Data Rate | 100MHz | Operating Temperature | -40°C ~ 125°C (TA) |
Features | Auto-Direction Sensing | Mounting Type | Surface Mount |
Supplier Device Package | 12-UQFN (1.7x2) | Base Product Number | LSF0204 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 3596 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for LSF0204DRUTR, guaranteed quotes back within 12hr.
All great the lights works (I prove about 10 of them) and the shipping was very fast ^^