Payment Method
LM5160QPWPRQ1
Wide Input 65V, 2A Synchronous Buck / Fly-Buck™ Converter
-
Manufacturer:
-
Mfr.Part #:
LM5160QPWPRQ1
-
Datasheet:
-
Device type:
Converters
-
Topology:
Buck
-
Vin (min) (V):
4.5
-
Vin (max) (V):
65
-
EDA/CAD Models:
Availability: 4924 PCS
Please fill in the short form below and we will provide you the quotation immediately.
LM5160QPWPRQ1 General Description
The LM5160-Q1 is a 65-V, 2-A synchronous step-down converter with integrated high-side and low-side MOSFETs. The adaptive constant on-time control scheme requires no loop compensation and supports high step-down ratios with fast transient response. An internal feedback amplifier maintains ±1% output voltage regulation over the entire operating temperature range. The on-time varies inversely with input voltage resulting in nearly constant switching frequency.
Peak and valley current limit circuits protect against overload conditions. The undervoltage lockout (EN/UVLO) circuit provides independently adjustable input undervoltage threshold and hysteresis. The LM5160-Q1 is programmed through the FPWM pin to operate in continuous conduction mode (CCM) from no load to full load or to automatically switch to discontinuous conduction mode (DCM) at light load for higher efficiency. Forced CCM operation supports multiple-output and isolated Fly-Buck applications using a coupled inductor.
The LM5160-Q1 is qualified to automotive AEC-Q100 grade 1 and is available in 14-pin HTSSOP package with 0.65-mm pin pitch.
Key Features
- AEC-Q100 Qualified for Automotive Applications
- Temperature Grade 1: –40°C ≤ TA ≤ 125°C
- HBM ESD Classification Level 2
- CDM ESD Classification Level C5
- Wide 4.5-V to 65-V Input Voltage Range
- Integrated High-Side and Low-Side Switches
- No External Schottky Diode Required
- 2-A Maximum Load Current
- Meets CISPR 25 EMI Standard
- Adaptive Constant On-Time Control
- No External Loop Compensation
- Fast Transient Response
- Selectable Forced PWM or DCM Operation
- FPWM Supports Multi-Output Fly-Buck™
- Nearly Constant Switching Frequency
- Resistor Adjustable up to 1 MHz
- Programmable Soft-Start Time
- Prebiased Start-Up
- ±1% Feedback Voltage Reference
- Inherent Protection Features for Robust Design
- Peak Current Limiting Protection
- Adjustable Input UVLO and Hysteresis
- VCC and Gate Drive UVLO Protection
- Thermal Shutdown Protection With Hysteresis
- 14-Pin HTSSOP Package, 0.65-mm Pitch
- Create a Custom Design Using the LM5160-Q1 With the WEBENCH® Power Designer
Specifications
Device type | Converters | Topology | Buck |
Vin (min) (V) | 4.5 | Vin (max) (V) | 65 |
Vout (min) (V) | 2 | Vout (max) (V) | 60 |
Iout (max) (A) | 2 | Features | Enable, Light load efficiency, Pre-bias soft start, Synchronous rectification |
Operating temperature range (°C) | -40 to 125 | Regulated outputs (#) | 1 |
Control mode | Constant on-time (COT) | Rating | Automotive |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 4924 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for LM5160QPWPRQ1, guaranteed quotes back within 12hr.
It's all right. Shipping a little long