Payment Method
KSZ8864CNXCA
Ethernet Switch 10/100 Base-T/TX PHY MII, RMII Interface 64-QFN (8x8)
-
Manufacturer:
-
Mfr.Part #:
KSZ8864CNXCA
-
Datasheet:
-
Programmable:
Not Verified
-
Protocol:
Ethernet
-
Function:
Switch
-
Interface:
MII, RMII
-
EDA/CAD Models:
Availability: 4908 PCS
Please fill in the short form below and we will provide you the quotation immediately.
KSZ8864CNXCA General Description
The KSZ8864 is a highly-integrated, Layer 2 managed 4-port switch with optimized design, plentiful features and small package size. The KSZ8864 Automotive qualified (AEC-Q100).
KSZ8864 is designed for cost-sensitive 10/100Mbps 4-port switch systems. On-chip termination, low-power consumption, and small package to save system cost. KSZ8864 utilizes a shared memory-based switch fabric with full non-blocking configuration.
KSZ8864 also provides an extensive feature set including: power management, programmable rate limiting and priority ratio, tag/port-based VLAN, packet filtering, quality of service (QoS), four queue prioritization, management interface, and MIB counters. Ports 3 and 4 support either MII or RMII interfaces. KSZ8864 provides multiple CPU control/data interfaces to effectively address a wide variety of fast Ethernet applications.
The KSZ8864 contains four MACs and two PHYs. The two PHYs support the 10/100Base-T/TX.All registers of MACs and PHYs units can be managed by the control interface of SPI or the SMI. MIIM registers the PHYs can be accessed through the MDC/MDIO interface. EEPROM can set all control registers by I2C controller interface for the unmanaged mode.
Microchip's complimentary and confidential LANCheck® online design review service is available for customers who have selected our products for their application design-in. The LANCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.
Key Features
- Fully managed 4-port 10/100Mbps switch with dual MII/RMII interfaces
- IEEE802.1q VLAN
- QoS packet prioritization
- IEEE802.1d rapid spanning tree protocol (RSTP)
- Programmable rate limiting at the ingress and egress on a per port and priority basis
- Source MAC address filtering for ring support
- MIB counters for fully compliant statistics, gathering 34 MIB counters per port
- Ultra-low power consumption with integrated line termination
- Single 3.3V supply with internal 1.2V LDO controller
- Flexible VDDIO support 3.3V, 2.5V, and 1.8V
- AEC-Q100 qualified
- Industrial temperature range: -40°C to +85°C
- Small 64-Pin 8mm x 8mm QFN
Specifications
Category | Integrated Circuits (ICs)InterfaceControllers | Series | - |
Programmable | Not Verified | Protocol | Ethernet |
Function | Switch | Interface | MII, RMII |
Standards | 10/100 Base-T/TX PHY | Voltage - Supply | 1.8V, 2.5V, 3.3V |
Current - Supply | - | Operating Temperature | 0°C ~ 70°C |
Base Product Number | KSZ8864 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 4908 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for KSZ8864CNXCA, guaranteed quotes back within 12hr.
Top Sellers
-
KSZ9031RNXIC
Microchip
1040+ $2.460
-
LAN8742A-CZ-TR
Microchip
LAN8742A-CZ-TR: VQFN-24 Package Design
-
KSZ9031RNXIA
Microchip
Single-channel data transfer
-
RTC6705
Microchip
5.8GHz FM Transmitter
-
KSZ9131RNXI
Microchip
1 Port Ethernet Physical Layer Transceiver with 10/100/1000 Mbps in a 48-Pin VQFN EP package
Ok. 104 pcs In each bow. Everything is super.