Payment Method
KSZ8842-16MVLI +BOM
2-Port 10/100 Managed Ethernet Switch.
LQFP-128-
Manufacturer:
-
Mfr.Part #:
KSZ8842-16MVLI
-
Datasheet:
-
Programmable:
Not Verified
-
Protocol:
Ethernet
-
Function:
Switch
-
Interface:
Parallel
-
EDA/CAD Models:
Availability: 7240 PCS
Please fill in the short form below and we will provide you the quotation immediately.
KSZ8842-16MVLI General Description
When it comes to energy efficiency, the KSZ8842-16MVLI doesn't disappoint. It features Energy Efficient Ethernet (IEEE 802.3az) and Port Down Power Saving mode, helping you save on power consumption without sacrificing performance. With a compact 10mm x 10mm package size, this switch is ideal for designs where space is at a premium. The support for VLAN tagging and port mirroring make network management a breeze, while diagnostic features like cable diagnostics and loop detection ensure that any issues can be quickly identified and resolved
Key Features
- Non-blocking switch fabric assures fast packet delivery by utilizing a 1K entry MAC Address look-up engine and a store-and-forward architecture
- Fully compliant with IEEE 802.3u standards
- Full-duplex IEEE 802.3x flow control (Pause) with force mode option
- Half-duplex back pressure flow control
- IEEE 802.1Q VLAN support for up to 16 groups (full-range of VLAN IDs)
- VLAN ID tag/untag options, per port basis
- IEEE 802.1p/Q tag insertion or removal on a per-port basis (egress)
- Programmable rate limiting at the ingress and egress port
- Broadcast storm protection
- IEEE 802.1d spanning tree protocol support
- MAC filtering function to filter unicast packets
- Unknown MAC address forwarding function
- Direct forwarding mode enabling the processor to identify the ingress port and to specify the egress port
- IGMP v1/v2 snooping support for multicast packet filtering
- IPV6 Multicast Listener Discovery (MLD) snooping support
- Management information base (MIB) counters for fully compliant statistics gathering: 32 MIB counters per port
- Loop back modes for remote failure diagnostics
- There are three kinds of register groups:
- The PCI configuration registers are used to initialize and configure the PCI interface
- The PCI control/status registers are used to communicate between the host and KSZ8842-PMQL/PMBL
- Switch registers are used to support transceiver control and status. They are configurable on-the-fly (port-priority, 802.1p/d/Q, etc.)
- Per port, 802.1p and DiffServ based
- Re-mapping of 802.1p priority field on a per port basis
- Full-chip hardware power-down (register configuration not saved) provides for low power dissipation
- Per port-based software power-save on PHY (idle link detection, register configuration preserved)
- Single power supply: 3.3V
- Commercial Temperature Range: 0°C to +70°C
- Industrial Temperature Range: -40°C to +85°C
- Available in 128-pin PQFP and 100-ball LFBGA
Specifications
Category | Integrated Circuits (ICs)InterfaceControllers | Series | - |
Programmable | Not Verified | Protocol | Ethernet |
Function | Switch | Interface | Parallel |
Standards | 10/100 Base-T/TX PHY | Voltage - Supply | 3.1V ~ 3.5V |
Current - Supply | 122mA | Operating Temperature | -40°C ~ 85°C |
Base Product Number | KSZ8842 | Product Category | Ethernet ICs |
Mounting Style | SMD/SMT | Product | Ethernet Switches |
Standard | 10BASE-T, 100BASE-TX | Number of Transceivers | 2 Transceiver |
Data Rate | 10 Mb/s, 100 Mb/s | Interface Type | 8 bit/16 bit, MDI, MDI-X |
Operating Supply Voltage | 3.3 V | Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 85 C | Duplex | Full Duplex, Half Duplex |
Height | 1.6 mm | Length | 13.9 mm |
Moisture Sensitive | Yes | Product Type | Ethernet ICs |
Factory Pack Quantity | 90 | Subcategory | Communication & Networking ICs |
Supply Current - Max | 122 mA | Supply Voltage - Max | 3.5 V |
Supply Voltage - Min | 3.1 V | Width | 13.9 mm |
Unit Weight | 0.021693 oz |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 7,240
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for KSZ8842-16MVLI, guaranteed quotes back within 12hr.
Top Sellers
-
USB3320C-EZK
Microchip
980+ $1.093
-
MCP23017-E/SS
Microchip
1000+ $1.048
-
LAN8742A-CZ-TR
Microchip
LAN8742A-CZ-TR: VQFN-24 Package Design
-
KSZ9031RNXIA
Microchip
Single-channel data transfer
-
KSZ9131RNXI
Microchip
1 Port Ethernet Physical Layer Transceiver with 10/100/1000 Mbps in a 48-Pin VQFN EP package
I received the goods well.I wish you success in your businessThank you.