This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

KSZ8051RNLUB-VAO

PHY 1-CH 10Mbps/100Mbps 1.8V/2.5V/3.3V Automotive AEC-Q100 32-Pin VQFN EP

Manufacturer:

Microchip
Mfr.Part #:

KSZ8051RNLUB-VAO
Datasheet:

KSZ8051RNLUB-VAO Datasheet (PDF)
Mounting Style:

SMD/SMT
Product:

Ethernet PHYs
Standard:

10BASE-T, 100BASE-TX
Number of Transceivers:

1 Transceiver
EDA/CAD Models:

Request Free CAD Models for KSZ8051RNLUB-VAO

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

KSZ8051RNLUB-VAO General Description

The KSZ8051 is an AEC-Q100 standard qualified single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for automotive applications.

The KSZ8051 is a highly-integrated PHY solution. It reduces board cost and simplifies board layout by using on-chip termination resistors for the differential pairs and by integrating a low-noise regulator to supply the 1.2V core.The KSZ8051MNLU/V offers the Media Independent Interface (MII) and the KSZ8051RNLUB-VAO offers the Reduced Media Independent Interface (RMII) for direct connection with MII/RMII-compliant Ethernet MAC processors and switches.A 25MHz crystal is used to generate all required clocks, including the 50MHz RMII reference clock output for the KSZ8051RNLUB-VAO.

The KSZ8051 provides diagnostic features to facilitate system bring-up and debugging in production testing and in product deployment. Parametric NAND tree support enables fault detection between KSZ8051 I/Os and the board. LinkMD TDR-based cable diagnostics identify faulty copper cabling. The KSZ8051MNLU/V and KSZ8051RNLUB-VAO are available in 32-pin, 5x5 lead-free QFN packages

Microchip's complimentary and confidential LANCheck® online design review service is available for customers who have selected our products for their application design-in. The LANCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.

Key Features

Single-chip 10Base-T/100Base-TX IEEE 802.3 compliant Ethernet transceiver
AEC-Q100 qualified for automotive applications
MII interface support (KSZ8051MNLU/V)
RMII v1.2 Interface support with a 50MHz reference clock output to MAC, and an option to input a 50MHz reference clock (KSZ8051RNLUB-VAO)
Back-to-back mode support for a 100Mbps copper repeater
MDC/MDIO management interface for PHY register configuration
Programmable interrupt output
LED outputs for link, activity, and speed status indication
On-chip termination resistors for the differential pairs
Baseline wander correction
HP Auto MDI/MDI-X to reliably detect and correct straight-through and crossover cable connections with disable and enable option
Auto-negotiation to automatically select the highest link-up speed (10/100Mbps) and duplex (half/full)
Power-down and power-saving modes
LinkMD TDR-based cable diagnostics to identify faulty copper cabling
Parametric NAND Tree support for fault detection between chip I/Os and the board
Loopback modes for diagnostics
Single 3.3V power supply with VDD I/O options for 1.8V, 2.5V, or 3.3V
Built-in 1.2V regulator for core
32-pin (5mm x 5mm) QFN package

Specifications

Product Category	Ethernet ICs	Mounting Style	SMD/SMT
Product	Ethernet PHYs	Standard	10BASE-T, 100BASE-TX
Number of Transceivers	1 Transceiver	Data Rate	10 Mb/s, 100 Mb/s
Interface Type	RMII	Operating Supply Voltage	3.3 V
Minimum Operating Temperature	- 40 C	Maximum Operating Temperature	+ 85 C
Qualification	AEC-Q100	Duplex	Full-Duplex, Half-Duplex
Moisture Sensitive	Yes	Product Type	Ethernet ICs
Subcategory	Communication & Networking ICs	Supply Current - Max	47 mA
Supply Voltage - Max	3.465 V	Supply Voltage - Min	3.135 V