Payment Method
IT6613E
Transmitter 1TX 100-Pin LQFP
-
Manufacturer: ITE
-
Mfr.Part #: IT6613E
-
Datasheet: IT6613E Datasheet (PDF)
-
Package/Case: QFP100
-
RoHS:
-
EDA/CAD Models: Request Free CAD Models for IT6613E
Availability: 7072 PCS
Please fill in the short form below and we will provide you the quotation immediately.
Key Features
- Single channel HDMI transmitter
- Compliant with HDMI 1.3a, HDCP 1.2 and DVI 1.0 specifications
- Supporting pixel rates from 25MHz to 165MHz
- DTV resolutions: 480i, 576i, 480p, 576p, 720p, 1080i up to 1080p
- PC resolutions: VGA, SVGA, XGA, SXGA up to UXGA
- Various video input interface supporting digital video standards such as:
- 24-bit RGB/YCbCr 4:4:4 with RB swap option
- 16/20/24-bit YCbCr 4:2:2 with YC swap option
- 8/10/12-bit YCbCr 4:2:2 (CCIR-656)
- BTA-T1004 format
- DE-only interface
- DDR option
- Support HDMI1.4 3D feature
- Frame packing mode up to
- [email protected]/24Hz
- [email protected]/60Hz
- Top and Bottom up to
- [email protected]/60Hz
- Side-by-Side (Half) up to
- [email protected]/60Hz
- Side-by-Side (Full) up to
- [email protected]/60Hz
- Bi-direction Color Space Conversion (CSC) between RGB and YCbCr color spaces with
- programmable coefficients.
- Digital audio input interface supporting
- audio sample rate: 32~192 kHz
- sample size: 16~24 bits
- four I2S interfaces supporting 8-channel audio
- S/PDIF interface supporting PCM, Dolby Digital, DTS digital audio transmission at up to
- 192kHz
- Support for high-bit-rate (HBR) audio such as DTS-HD and Dolby TrueHD through
- the four I2S interface or the S/PDIF interface, with frame rates as high as 768kHz
- Compatible with IEC 60958 and IEC 61937
- Software programmable HDMI output current, enabling user to optimize the performance for
- fixed-cable systems or those with pre-defined cable length
- MCLK input is optional for audio operation. Users could opt to implement audio input interface
- with or without MCLK.
- Integrated pre-programmed HDCP keys
- Purely hardware HDCP engine increasing the robustness and security of HDCP operation
- Monitor detection through Hot Plug Detection and Receiver Termination Detection
- Embedded full-function pattern generator
- Intelligent, programmable power management
- Embedded hardware controlled CEC PHY
- Ultra low power consumption, operation power is less than 70mw at
- [email protected]
- format.
- 64-pin (9x9 mm) QFN package
Specifications
Manufacturer | ITE | Product Category | IC Chips |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 7072 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for IT6613E, guaranteed quotes back within 12hr.
Top Sellers
-
BT24
Amp'ed RF Tech
Bluetooth Bluetooth v3.0, Class 2 Transceiver Module 2.4GHz ~ 2.4835GHz Integrated, Chip Surface Mount
-
ESP-WROOM-32
ESPRESSIF
WiFi 802.11b/g/n/d/e/i Transceiver Module 2.4GHz Surface Mount
-
P1505
L3 Narda-MITEQ
RF IC Phase Shifter General Purpose 0Hz ~ 8.2GHz 100W Module
-
CSR8645
Qualcomm Technologies International, Ltd.
Single Chip Bluetooth Audio
-
VS1053B
VLSI SOLUTION OY
Ogg Vorbis/MP3/AAC/WMA/FLAC/ MIDI AUDIO CODEC CIRCUIT