This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

IS25WP128-JBLE +BOM

FLASH Memory IC 128Mbit SPI - Quad I/O, QPI, DTR 133 MHz 8-SOIC

Manufacturer:

ISSI
Mfr.Part #:

IS25WP128-JBLE
Datasheet:

IS25WP128-JBLE Datasheet (PDF)
Mounting Style:

SMD/SMT
Series:

IS25WP128
Memory Size:

128 Mbit
Supply Voltage - Min:

1.65 V
EDA/CAD Models:

Request Free CAD Models for IS25WP128-JBLE

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

IS25WP128-JBLE General Description

FLASH Memory IC 128Mbit SPI - Quad I/O, QPI, DTR 133 MHz 8-SOIC

Key Features

Industry Standard Serial Interface
- IS25WP128: 128M-bit/16M-byte
- IS25WP064: 64M-bit/8M-byte
- IS25WP032: 32M-bit/4M-byte
- 256 bytes per Programmable Page
- Supports standard SPI, Fast, Dual, Dual
I/O, Quad, Quad I/O, SPI DTR, Dual I/O
DTR, Quad I/O DTR, and QPI
- Supports Serial Flash Discoverable
Parameters (SFDP)
High Performance Serial Flash (SPI)
- 50MHz Normal and 133Mhz Fast Read
- 532 MHz equivalent QPI
- DTR (Dual Transfer Rate) up to 66MHz
- Selectable dummy cycles
- Configurable drive strength
- Supports SPI Modes 0 and 3
- More than 100,000 erase/program cycles
- More than 20-year data retention
Flexible & Efficient Memory Architecture
- Chip Erase with Uniform: Sector/Block
Erase (4K/32K/64K-Byte)
- Program 1 to 256 bytes per page
- Program/Erase Suspend & Resume
Efficient Read and Program modes
- Low Instruction Overhead Operations
- Continuous Read 8/16/32/64-Byte burst
- Selectable burst length
- QPI for reduced instruction overhead
- AutoBoot operation
Low Power with Wide Temp. Ranges
- Single 1.65V to 1.95V Voltage Supply
- 10 mA Active Read Current
- 8 µA Standby Current
- 1 µA Deep Power Down
- Temp Grades:
Extended: -40°C to +105°C
V Grade: -40°C to +125°C
Auto Grade: up to +125°C
Advanced Security Protection
- Software and Hardware Write Protection
- Power Supply lock protect
- 4x256-Byte dedicated security area
with user-lockable bits, (OTP) One
Time Programmable Memory
- 128 bit Unique ID for each device
Industry Standard Pin-out & Packages(1)
- JM =16-pin SOIC 300mil(2)
- JB = 8-pin SOIC 208mil
- JF = 8-pin VSOP 208mil
- JK = 8-contact WSON 6x5mm
- JL = 8-contact WSON 8x6mm
- JG= 24-ball TFBGA 6x8mm
- KGD (Call Factory)
Notes:
1. Call Factory for other package options available
2. For the additional RESET# pin option, call Factory

Specifications

Product Category	NOR Flash	Mounting Style	SMD/SMT
Series	IS25WP128	Memory Size	128 Mbit
Supply Voltage - Min	1.65 V	Supply Voltage - Max	1.95 V
Active Read Current - Max	13 mA	Interface Type	QPI, SPI
Maximum Clock Frequency	133 MHz	Organization	16 M x 8
Data Bus Width	8 bit	Timing Type	Synchronous
Minimum Operating Temperature	- 40 C	Maximum Operating Temperature	+ 105 C
Architecture	Sector	Memory Type	NOR
Moisture Sensitive	Yes	Product Type	NOR Flash
Speed	133 MHz	Factory Pack Quantity	90
Subcategory	Memory & Data Storage	Unit Weight	0.030018 oz
Programmabe	Verified	Memory Format	FLASH
Technology	FLASH	Memory Organization	16M x 8
Memory Interface	SPI - Quad I/O, QPI, DTR	Clock Frequency	133 MHz
Write Cycle Time - Word, Page	800µs	Voltage - Supply	1.65V ~ 1.95V
Operating Temperature	-40°C ~ 105°C (TA)	Mounting Type	Surface Mount
Base Product Number	IS25WP128