This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

HV57009PG-G

Shift Shift Register 2 Element 32 Bit 80-PQFP (14x20)

Manufacturer:

Microchip
Mfr.Part #:

HV57009PG-G
Datasheet:

HV57009PG-G Datasheet (PDF)
Operating Supply Voltage:

4.5 V to 5.5 V
Supply Voltage - Min:

4.5 V
Supply Voltage - Max:

5.5 V
Mounting Style:

SMD/SMT
EDA/CAD Models:

Request Free CAD Models for HV57009PG-G

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

HV57009PG-G General Description

The HV57009 is a low-voltage serial to high-voltage parallel converter with P-channel open drain outputs. This device has been designed for use as a driver for plasma panels.The device has two parallel 32-bit shift registers, permitting data rates twice the speed of one (they are clocked together). There are also 64 latches and control logic to perform the blanking of the outputs. HVOUT1 is connected to the first stage of the first shift register through the blanking logic. Data is shifted through the shift registers on the logic low to high transition of the clock. The DIR pin causes CCW shifting when connected to VSS, and CW shifting when connected to VDD. A data output buffer is provided for cascading devices. This output reflects the current status of the last bit of the shift register (HVOUT64). Operation of the shift register is not affected by the LE (latch enable), or the BL (blanking) inputs. Transfer of data from the shift registers to latches occurs when the LE input is high. The data in the latches is stored when LE is low.The HV570 has 64 channels of output constant current sourcing capability. They are adjustable from 0.1 to 2.0mA through one external resistor or a current source.

Key Features

HVCMOS® technology
5.0V CMOS Logic
Output voltage up to -85V
Output current source control
16MHz equivalent data rate
Latched data outputs
Forward and reverse shifting options (DIR pin)
Diode to VDD allows efficient power recovery

Specifications

Product Category	Serial to Parallel Logic Converters	Operating Supply Voltage	4.5 V to 5.5 V
Supply Voltage - Min	4.5 V	Supply Voltage - Max	5.5 V
Mounting Style	SMD/SMT	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 85 C	Logic Type	CMOS
Maximum Operating Frequency	8 MHz	Moisture Sensitive	Yes
Number of Input Lines	4 Input	Number of Output Lines	64 Output
Operating Supply Current	15 mA	Output Type	Open Drain
Pd - Power Dissipation	1.2 W	Product Type	Serial to Parallel Logic Converters
Factory Pack Quantity	66	Subcategory	Logic ICs
Unit Weight	0.032999 oz