This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

HI1-0508-2 +BOM

High-quality component for precision signal routing

Manufacturer:

RENESAS
Mfr.Part #:

HI1-0508-2
Datasheet:

HI1-0508-2 Datasheet (PDF)
Part Life Cycle Code:

Obsolete
HTS Code:

8542.39.00.01
Analog IC - Other Type:

SINGLE-ENDED MULTIPLEXER
JESD-30 Code:

R-XDIP-T16

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

HI1-0508-2 General Description

The HI-506/HI-507 and HI-508/HI-509 monolithic CMOS multiplexers each include an array of sixteen and eight analog switches respectively, a digital decoder circuit for channel selection, voltage reference for logic thresholds, and an enable input for device selection when several multiplexers are present. The Dielectric Isolation (DI) process used in fabrication of these devices eliminates the problem of latchup. DI also offers much lower substrate leakage and parasitic capacitance than conventional junction isolated CMOS (see Application Note AN520). The switching threshold for each digital input is established by an internal +5V reference, providing a guaranteed minimum 2. 4V for logic 1 and maximum 0. 8V for logic 0. This allows direct interface without pullup resistors to signals from most logic families: CMOS, TTL, DTL and some PMOS. For protection against transient overvoltage, the digital inputs include a series 200Ω resistor and diode clamp to each supply. The HI-506 is a single 16-channel, the HI-507 is an 8-channel differential, the HI-508 is a single 8-channel and the HI-509 is a 4-channel differential multiplexer. If input overvoltages are present, the HI-546/HI-547/HI-548/ HI-549 multiplexers are recommended.

Key Features

Pb-Free Available (RoHS Compliant) (See Ordering Info)
Low ON Resistance 180Ω
Wide Analog Signal Range ±15V
TTL/CMOS Compatible
Access Time 250ns
Maximum Power Supply 44V
Break-Before-Make Switching
No Latch-Up
Replaces DG506A/DG506AA and DG507A/DG507AA
Replaces DG508A/DG508AA and DG509A/DG509AA
Pb-Free Available (RoHS Compliant)

Specifications

Part Life Cycle Code	Obsolete	Reach Compliance Code
HTS Code	8542.39.00.01	Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
JESD-30 Code	R-XDIP-T16	Neg Supply Voltage-Nom (Vsup)	-15 V
Number of Channels	8	Number of Functions	1
Number of Terminals	16	On-state Resistance-Max (Ron)	300 Ω
Operating Temperature-Max	125 °C	Operating Temperature-Min	-55 °C
Qualification Status	Not Qualified	Signal Current-Max	0.02 A
Supply Current-Max (Isup)	2.4 mA	Supply Voltage-Nom (Vsup)	15 V
Surface Mount	NO	Switch-on Time-Max	500 ns
Switching	BREAK-BEFORE-MAKE	Technology	CMOS
Temperature Grade	MILITARY	Terminal Form	THROUGH-HOLE
Terminal Pitch	2.54 mm	Terminal Position	DUAL