Payment Method
HA1-5104-2 +BOM
Operational Amplifiers - Op Amps OPAMP 4X 8MHZ VFB LWNOISE 14CDIP MIL
14-CERDIP-
Manufacturer:
-
Mfr.Part #:
HA1-5104-2
-
Datasheet:
-
Pbfree Code:
No
-
Part Life Cycle Code:
Active
-
Pin Count:
14
-
Amplifier Type:
OPERATIONAL AMPLIFIER
-
EDA/CAD Models:
Availability: 4189 PCS
Please fill in the short form below and we will provide you the quotation immediately.
HA1-5104-2 General Description
Low noise and high performance are key words describing HA-5102 and HA-5104. These general purpose amplifiers offer an array of dynamic specifications including a 3V/µs slew rate and 8MHz bandwidth. Complementing these outstanding parameters is a very low noise specification of 4. 3nV/√Hz at 1kHz. Fabricated using the Intersil high frequency DI process, these operational amplifiers also offer excellent input specifications such as a 0. 5mV offset voltage and 30nA offset current. Complementing these specifications are 108dB open loop gain and 60dB channel separation. Consuming a very modest amount of power (90mW/ package for duals and 150mW/package for quads), HA-5102/04 also provide 15mA of output current. This impressive combination of features make this series of amplifiers ideally suited for designs ranging from audio amplifiers and active filters to the most demanding signal conditioning and instrumentation circuits. These operational amplifiers are available in dual or quad form with industry standard pinouts allowing for immediate interchangeability with most other dual and quad operational amplifiers. HA-5102 Dual, Comp. HA-5104 Quad, Comp. Refer to the /883 data sheet for military product.
Key Features
- Low Noise 4.3nV/√Hz
- Bandwidth 8MHz (Compensated)
- Slew Rate 3V/µs (Compensated)
- Low Offset Voltage 0.5mV
- Available in Duals or Quads
Specifications
Pbfree Code | No | Part Life Cycle Code | Active |
Pin Count | 14 | Reach Compliance Code | |
Amplifier Type | OPERATIONAL AMPLIFIER | Average Bias Current-Max (IIB) | 0.325 µA |
Common-mode Reject Ratio-Nom | 95 dB | Input Offset Voltage-Max | 3000 µV |
JESD-30 Code | R-GDIP-T14 | JESD-609 Code | e0 |
Moisture Sensitivity Level | NOT SPECIFIED | Neg Supply Voltage Limit-Max | -20 V |
Neg Supply Voltage-Nom (Vsup) | -15 V | Number of Functions | 4 |
Number of Terminals | 14 | Operating Temperature-Max | 125 °C |
Operating Temperature-Min | -55 °C | Peak Reflow Temperature (Cel) | NOT SPECIFIED |
Seated Height-Max | 5.08 mm | Slew Rate-Nom | 3 V/us |
Supply Voltage Limit-Max | 20 V | Supply Voltage-Nom (Vsup) | 15 V |
Surface Mount | NO | Technology | BIPOLAR |
Temperature Grade | MILITARY | Terminal Finish | TIN LEAD |
Terminal Form | THROUGH-HOLE | Terminal Pitch | 2.54 mm |
Terminal Position | DUAL | Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
Unity Gain BW-Nom | 8000 | Width | 7.62 mm |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 4,189
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for HA1-5104-2, guaranteed quotes back within 12hr.