Payment Method
FXL5T244BQX
Low Voltage Dual Supply 5-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs
-
Manufacturer:
-
Mfr.Part #:
FXL5T244BQX
-
Datasheet:
-
Case Outline:
510CB
-
MSL Temp (°C):
260
-
Container Type:
REEL
-
EDA/CAD Models:
Availability: 6329 PCS
Please fill in the short form below and we will provide you the quotation immediately.
FXL5T244BQX General Description
The FXL5T244 is a configurable dual-voltage-supply translator designed for one-way (unidirectional) voltage translation of signals between two voltage levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. A Inputs and the OE# Control Pin track the VCCI level, and Y Outputs track the VCCO level. Both inputs and outputs are designed to accept supply voltage levels from 1.1V to 3.6V. This allows for unidirectional voltage translation over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V. The device remains in 3-STATE until both VCCs reach active levels allowing either VCC to be powered-up first. The device also contains power down control circuits that place the device in 3-STATE if either VCC is removed. The OE# input, when HIGH, disables the outputs by placing them in 3-STATE condition.
Key Features
- One-way (unidirectional) translation between any 2 levels from 1.1V to 3.6V
- Fully configurable, inputs and outputs track respective VCC levels
- Non-preferential power-up sequencing; either VCC may be powered-up first
- Outputs remain in 3-STATE until active VCC level is reached
- Outputs switch to 3-STATE if either VCC is at GND
- Power-off protection
- Control input (OE#) level is referenced to VCCI voltage
- Packaged in 14-terminal DQFN (2.5mm x 3.0mm) package
- ESD protection exceeds:
- 4kV HBM ESD (per JESD22-A114 & Mil Std 883e 3015.7)
- 8kV HBM I/O to GND ESD (per JESD22-A114 & Mil Std 883e 3015.7)
- 1kV CDM ESD (per ESD STM 5.3)
- 200V MM ESD (per JESD22-A115 & ESD STM5.2)
Application
- This product is general usage and suitable for many different applications.
Specifications
Status | Active | Case Outline | 510CB |
MSL Temp (°C) | 260 | Container Type | REEL |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
FXL5T244BQX Datasheet PDF
FXL5T244BQX PDF Preview
Availability: 6329 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for FXL5T244BQX, guaranteed quotes back within 12hr.
Top Sellers
-
SN74LS04N
Texas Instruments
1000+ $0.342
-
MC14584BCP
Onsemi
The MC14584BCP is a CMOS hex inverter chip with Schmitt trigger inputs
-
NC7WZ17P6X
Onsemi
NC7WZ17P6X TinyLogic UHS Dual Buffer with Schmitt Trigger Inputs 3000 REEL
-
MC14011BCP
Onsemi
Quad 2-Input NAND
-
NC7WZ14P6X
ON
NC7WZ14P6X is a 2-element CMOS inverter Schmitt trigger that is housed in a 6-pin SC-88 package and comes on tape and reel
It came quickly. The package is soft, it was possible and denser to do. The screen has reached a whole, no broken pixel. I will check fully later.