Payment Method
DS2482S-800+ +BOM
1-Wire® Bridge, 1-Wire® to I2C I2C Interface 16-SOIC
SOP-16-
Manufacturer:
-
Mfr.Part #:
DS2482S-800+
-
Datasheet:
-
packingQty:
Tube,50
-
packingOption:
Tube
-
tempRange:
-40 to 85C
-
EDA/CAD Models:
Availability: 6623 PCS
Please fill in the short form below and we will provide you the quotation immediately.
DS2482S-800+ General Description
The DS2482-800 is an I²C to 1-Wire® bridge device that interfaces directly to standard (100kHz max) or fast (400kHz max) I²C masters to perform bi-directional protocol conversion between the I²C master and any downstream 1-Wire slave devices. Relative to any attached 1-Wire slave device, the DS2482-800 is a 1-Wire master. Internal factory-trimmed timers relieve the system host processor from generating time-critical 1-Wire waveforms, supporting both standard and Overdrive 1-Wire communication speeds. To optimize 1-Wire waveform generation, the DS2482-800 performs slew-rate control on rising and falling 1-Wire edges and has a programmable feature to mask the fast presence pulse edge that some 1-Wire slave devices can generate. Programmable strong pullup features support 1-Wire power delivery to 1-Wire devices such as EEPROMs and sensors. The DS2482-800 combines these features with eight independent 1-Wire I/O channels. The I²C slave address assignment is controlled by three binary address inputs, resolving potential conflicts with other I²C slave devices in the system.
Key Features
- Allows Easy Interface Between an I2C Micro Port and a 1-Wire Slave
- I2C Host Interface Supports 100kHz and 400kHz I2C Communication Speeds
- 8 Channels of Independently Operated 1-Wire I/O
- 1-Wire Master I/O with Selectable Active or Passive 1-Wire Pullup
- Provides Reset/Presence, 8-Bit, Single-Bit, and 3-Bit 1-Wire I/O Sequences
- Standard and Overdrive 1-Wire Communication Speeds 2
- Three Address Inputs for I2C Address Assignment
- Minimizes Line Noise, Reducing System EMI
- Slew-Controlled 1-Wire Edges
- Supports EEPROMs, Temp Sensors, or Other 1-Wire Slaves That Have Momentary High Source Current Modes
- Strong 1-Wire Pullup Provided by an Internal Low-Impedance Signal Path
- Wide Operating Range: 2.9V to 5.5V, -40°C to +85°C
- 16-Pin SO Package (150 mils)
Application
- Central Office Switches
- Medical Clinical Diagnostic Equipment
- PBXs
- Rack-Based Servers
- Wireless Base Stations
Specifications
model | DS2482S-800+ | packingQty | Tube,50 |
packingOption | Tube | lifeCycle | production |
tempRange | -40 to 85C |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 6,623
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | $10.999 | $11.00 |
10+ | $9.693 | $96.93 |
30+ | $8.897 | $266.91 |
100+ | $8.229 | $822.90 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for DS2482S-800+, guaranteed quotes back within 12hr.
Delivery about 1 week, everything works as it should, the sound is not loud, but very high and piercing, audible throughout the apartment, took for the sensor on the ref. Column.