Payment Method
AM26LS32ACD
Quadruple Differential Line Receivers
-
Manufacturer:
-
Mfr.Part #:
AM26LS32ACD
-
Datasheet:
-
Type:
Receiver
-
Protocol:
RS422, RS423
-
Number of Drivers/Receivers:
0/4
-
Receiver Hysteresis:
50 mV
-
EDA/CAD Models:
Availability: 4208 PCS
Please fill in the short form below and we will provide you the quotation immediately.
AM26LS32ACD General Description
The AM26LS32Ax and AM26LS33Ax devices are quadruple differential line receivers for balanced and unbalanced digital data transmission. The enable function is common to all four receivers and offers a choice of active-high or active-low input. The 3-state outputs permit connection directly to a bus-organized system. When the inputs are open, the fail-safe design makes sure the outputs always are high.
Compared to the AM26LS32 and the AM26LS33, the AM26LS32A and AM26LS33A incorporate an additional stage of amplification to improve sensitivity. The input impedance has been increased, resulting in less loading of the bus line. The additional stage has increased propagation delay; however, this does not affect interchangeability in most applications.
The AM26LS32AC and AM26LS33AC are characterized for operation from 0°C to 70°C. The AM26LS32AI is characterized for operation from –40°C to 85°C. The AM26LS32AM and AM26LS33AM are characterized for operation over the full military temperature range of –55°C to 125°C.
Key Features
- AM26LS32A Devices meet or exceed the requirements of ANSI TIA/EIA-422-B, TIA/EIA-423-B, and ITU recommendations V.10 and V.11
- AM26LS32A Devices have ±7-V Common-mode range with ±200-mV sensitivity
- AM26LS33A Devices have ±15-V common-mode range with ±500-mV sensitivity
- Input hysteresis 50 mV typical
- Operate from a single 5-V supply
- Low-power Schottky circuitry
- 3-State outputs
- Complementary output-enable inputs
- Input impedance 12 kΩ minimum
- Open input fail-safe
Specifications
Category | Integrated Circuits (ICs)InterfaceDrivers, Receivers, Transceivers | Series | - |
Type | Receiver | Protocol | RS422, RS423 |
Number of Drivers/Receivers | 0/4 | Duplex | - |
Receiver Hysteresis | 50 mV | Data Rate | - |
Voltage - Supply | 4.75V ~ 5.25V | Operating Temperature | 0°C ~ 70°C |
Mounting Type | Surface Mount | Base Product Number | AM26LS32 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 4208 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | $0.963 | $0.96 |
10+ | $0.852 | $8.52 |
30+ | $0.746 | $22.38 |
100+ | $0.666 | $66.60 |
500+ | $0.634 | $317.00 |
1000+ | $0.619 | $619.00 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for AM26LS32ACD, guaranteed quotes back within 12hr.
Top Sellers
-
SN65HVD230DR
TI
1000+ $0.403
-
SN75176BP
Texas Instruments
1000+ $0.309
-
PCF8574AN
TI
8-bit 2.5- to 5.5-V I2C/SMBus I/O expander with interrupt
-
MAX232N
Texas Instruments
Dual Transmitter/Receiver RS-232 16-Pin PDIP Tube
-
TCA6424RGJR
Texas Instruments, Inc
24-bit translating 1.65- to 5.5-V I2C/SMBus I/O expander with interrupt, reset & config registers
Adis is a very nice and funny person. Always quota the best price for you. Looking to work with him again.