This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

AFE5808AZCF +BOM

Fully-Integrated, 8-Channel Ultrasound Analog Front End With Passive CW Mixer

Manufacturer:

Texas Instruments, Inc
Mfr.Part #:

AFE5808AZCF
Datasheet:

AFE5808AZCF Datasheet (PDF)
Device type:

Receiver
Number of input channels:

8
Active supply current (typ) (mA):

133
Supply voltage (max) (V):

3.6
EDA/CAD Models:

Request Free CAD Models for AFE5808AZCF

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

AFE5808AZCF General Description

The AFE5808A is a highly-integrated, analog front-end (AFE) solution specifically designed for ultrasound systems in which high performance and small size are required. The AFE5808A integrates a complete time-gain-control (TGC) imaging path and a continuous wave Doppler (CWD) path. This device also enables users to select one of various power and noise combinations to optimize system performance. Therefore, the AFE5808A is an outstanding ultrasound analog front-end solution not only for high-end systems, but also for portable ones.

The AFE5808A device contains eight voltage controlled amplifiers (VCA), 14- and 12-bit analog-to-digital converters (ADC), and CW mixers. The VCA includes a low-noise amplifier (LNA), voltage-controlled attenuator (VCAT), programmable gain amplifier (PGA), and low-pass filter (LPF). The LNA gain is programmable to support 250 mV_PP to 1 V_PP input signals. Programmable active termination is also supported by the LNA. The ultralow noise VCAT provides an attenuation control range of 40 dB, and improves overall low gain SNR that benefits harmonic imaging and near field imaging. The PGA provides gain options of 24 dB and 30 dB. In front of the ADC, a LPF can be configured as 10 MHz, 15 MHz, 20 MHz, or 30 MHz to support ultrasound applications with different frequencies. The high-performance 14-bit, 65-MSPS ADC in the AFE5808A device achieves 77-dBFS SNR, and ensures excellent SNR at low-chain gain. The ADC LVDS outputs enable flexible system integration desired for miniaturized systems.

The AFE5808A device also incorporates a low-power passive mixer and a low-noise summing amplifier to accomplish on-chip CWD beamforming. Sixteen selectable phase-delays can be applied to each analog input signal. A unique 3rd- and 5th-order harmonic-suppression filter is implemented to enhance CW sensitivity.

The AFE5808A is available in a 15-mm × 9-mm, 135-pin BGA package and it is specified for operation from 0°C to 85°C. This device is also pin-to-pin compatible with the AFE5803, AFE5807, and AFE5808.

NOTE: The AFE5808A is an enhanced version of AFE5808 and is recommended for new designs. Compared to the AFE5808, the AFE5808A expands the cutoff frequency range of the digital high-pass filter; increases the handling capability of extreme overload signals; and lowers the correlated noise significantly when high-impedance source appears.

Key Features

8-Channel Complete Analog Front-End
- LNA, VCAT, PGA, LPF, ADC, and CW Mixer
Programmable Gain Low-Noise Amplifier (LNA)
- 24-, 18-, or 12-dB Gain
- 0.25-, 0.5-, or 1-V_PP Linear Input Range
- 0.63-, 0.7-, or 0.9-nV/√Hz Input-Referred Noise
- Programmable Active Termination
40-dB, Low-Noise Voltage-Controlled Attenuator
(VCAT)
24-, or 30-dB Programmable Gain Amplifier (PGA)
3rd-Order, Linear-Phase, Low-Pass Filter (LPF)
- 10 MHz, 15 MHz, 20 MHz, or 30 MHz
14-bit Analog-to-Digital Converter (ADC)
- 77-dBFS SNR at 65 MSPS
- LVDS Outputs
Noise and Power Optimizations (Full Chain)
- 158 mW/CH at 0.75 nV/√Hz, 65 MSPS
- 101 mW/CH at 1.1 nV/√Hz, 40 MSPS
- 80 mW/CH in CW Mode
Excellent Device-to-Device Gain Matching
- ±0.5 dB (Typical) and ±0.9 dB (Maximum)
Low Harmonic Distortion
Fast and Consistent Overload Recovery
Passive Mixer for Continuous Wave Doppler
(CWD)
- Low Close-in Phase Noise: –156 dBc/Hz at 1
  KHz Off 2.5-MHz Carrier
- Phase Resolution of 1/16λ
- Support 16X, 8X, 4X and 1X CW Clocks
- 12-dB Suppression on 3rd and 5th Harmonics
- Flexible Input Clocks
Small Package: 15-mm × 9-mm, 135-Pin NFBGA

Specifications

Device type	Receiver	Number of input channels	8
Active supply current (typ) (mA)	133	Supply voltage (max) (V)	3.6
Operating temperature range (°C)	0 to 85	Interface type	Serial LVDS
Features	Analog Front End (AFE)	Rating	Catalog
feature-resolution	14	feature-minimum-single-supply-voltage-v
feature-maximum-single-supply-voltage-v		feature-maximum-dual-supply-voltage-v
feature-power-supply-type	Analog\|Digital	feature-packaging	Tray
feature-minimum-dual-supply-voltage-v		feature-rad-hard
feature-pin-count	135	feature-cecc-qualified	No
feature-esd-protection		feature-escc-qualified
feature-military	No	feature-aec-qualified	No
feature-aec-qualified-number		feature-auto-motive	No
feature-p-pap	No	feature-eccn-code	EAR99
feature-svhc	No	feature-svhc-exceeds-threshold	No