This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

1EDI2004AS +BOM

Advanced Gate Driver for Reliable Power Conversion Systems

Manufacturer:

Infineon
Mfr.Part #:

1EDI2004AS
Datasheet:

1EDI2004AS Datasheet (PDF)
Product Type:

Gate Drivers

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

1EDI2004AS General Description

The 1EDI2004AS, based on Infineon's Coreless Transformer technology, offers galvanic isolation between low voltage and high voltage domains. With its support for 400 V, 600 V, and 1200 V IGBT technologies, this device is versatile and adaptable to various applications. It features a standard SPI interface that allows for easy configuration and control of advanced functions on the low voltage side. The 1EDI2004AS is designed for minimal distortion of the PWM signal with short propagation delays and controlled internal tolerances on the high voltage side. Additionally, it includes a wide range of safety-related functions to meet functional safety requirements at the system level, as per ISO 26262. These integrated features also facilitate the implementation of Active Short Circuit strategies. For optimal performance, the 1EDI2004AS can be paired with Infineon's 1EBN100XAE "EiceDRIVE Boost" booster stage family

Key Features

The following features are supported by the 1EDI2004AS:
Single Channel IGBT Driver.
On-chip galvanic insulation (up to 6kV).
Support of 600 V and 1200 V IGBT technologies.
Low propagation delay and minimal PWM distortion.
Support of 5 V logic levels (primary side).
16-bit Standard SPI interface (up to 2 MBaud) with daisy chain support (primary side).
Enable input pin (primary side).
Pseudo-differential inputs for critical signals (primary side).
Power-On Reset pin (primary side).
Debug mode.
Pulse Suppressor.
Fully Programmable Active Clamping Inhibit signal (secondary side).
Optimal support of EiceBoost functions.
Operation with unipolar secondary supply possible (VEE2=VGND2).
Fullfil BISS standard 2.0 (Class 3) for conducted emissions.
36-pin PG-DSO-36 green package.
Automotive qualified (as per AEC Q100).