This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.


Full Speed/High Speed/Super Speed Four Port USB 3.0 Hub USB 2.0/USB 3.0 1.1V/3.3V Tray Automotive 64-Pin HTQFP EP

Inquiry Add To Bom

TUSB8041IPAPQ1 General Description

The TUSB8041-Q1 is a four-port USB 3.0 hub. It provides simultaneous SuperSpeed USB and high-speed/full-speed connections on the upstream port and provides SuperSpeed USB, high-speed, full-speed, or low-speed connections on the downstream ports. When the upstream port is connected to an electrical environment that only supports high-speed or full-speed/low-speed connections, SuperSpeed USB connectivity is disabled on the downstream ports. When the upstream port is connected to an electrical environment that only supports full-speed/low-speed connections, SuperSpeed USB and high-speed connectivity are disabled on the downstream ports.

The TUSB8041-Q1 supports per port or ganged power switching and over-current protection, and supports battery charging applications.

An individually port power controlled hub switches power on or off to each downstream port as requested by the USB host. Also when an individually port power controlled hub senses an over-current event, only power to the affected downstream port will be switched off.

A ganged hub switches on power to all its downstream ports when power is required to be on for any port. The power to the downstream ports is not switched off unless all ports are in a state that allows power to be removed. Also when a ganged hub senses an over-current event, power to all downstream ports will be switched off.

The TUSB8041-Q1 downstream ports provide support for battery charging applications by providing Battery Charging Downstream Port (CDP) handshaking support. It also supports a Dedicated Charging Port (DCP) mode when the upstream port is not connected. The DCP mode supports USB devices which support with the USB Battery Charging and Chinese Telecommunications Industry Standard YD/T 1591-2009. In addition, an automatic mode provides transparent support for BC devices and devices supporting Divider Mode charging solutions when the upstream port unconnected.

The TUSB8041-Q1 provides pin strap configuration for some features including battery charging support, and also provides customization though OTP ROM, I2C EEPROM or via an I2C/SMBus slave interface for PID, VID, and custom port and phy configurations. Custom string support is also available when using an I2C EEPROM or the I2C/SMBus slave interface.

The device is available in a 64-pin PAP package and is designed for operation over the temperature range of –40°C to 85°C.

Texas Instruments, Inc Inventory

Key Features

  • Four Port USB 3.0 Hub
  • USB 2.0 Hub Features
    • Multi Transaction Translator (MTT) Hub: Four
      Transaction Translators
    • Four Asynchronous Endpoint Buffers Per
      Transaction Translator
  • Supports Battery Charging
    • CDP Mode (Upstream Port Connected)
    • DCP Mode (Upstream Port Unconnected)
    • DCP Mode Complies with Chinese
      Telecommunications Industry Standard
      YD/T 1591-2009
    • D+/D– Divider Mode
  • Supports Operation as a USB 3.0 or USB 2.0
    Compound Device
  • Per Port or Ganged Power Switching and Over-
    Current Notification Inputs
  • OTP ROM, Serial EEPROM or I2C/SMBus Slave
    Interface for Custom Configurations:
    • VID and PID
    • Port Customizations
    • Manufacturer and Product Strings (not by OTP
    • Serial Number (not by OTP ROM)
  • Application Feature Selection Using Pin Selection
    or EEPROM/ or I2C/SMBus Slave Interface
  • Provides 128-Bit Universally Unique Identifier
  • Supports On-Board and In-System OTP/EEPROM
    Programming Via the USB 2.0 Upstream Port
  • Single Clock Input, 24-MHz Crystal or Oscillator
  • No Special Driver Requirements; Works
    Seamlessly on any Operating System with USB
    Stack Support
  • 64-Pin HTQFP Package (PAP)
Texas Instruments, Inc Original Stock
Texas Instruments, Inc Inventory


Category Integrated Circuits (ICs)InterfaceControllers Mfr Texas Instruments
Series Automotive, AEC-Q100 Package Tube
Product Status Active Digi-Key Programmable Not Verified
Protocol USB Function Hub Controller
Interface USB, GPIO, I²C, SMBus Standards USB 3.0
Voltage - Supply 1.1V, 3.3V Current - Supply -
Operating Temperature -40°C ~ 85°C Package / Case 64-PowerTQFP
Supplier Device Package 64-HTQFP (10x10) Base Product Number TUSB8041
Manufacturer Texas Instruments Product Category USB Interface IC
RoHS Details Product USB Hubs
Type Hub Controller Mounting Style SMD/SMT
Standard USB 3.0 Speed Super Speed (SS)
Data Rate 5 Gb/s Supply Voltage - Min 990 mV
Supply Voltage - Max 3.6 V Operating Supply Current 15 uA
Minimum Operating Temperature - 40 C Maximum Operating Temperature + 85 C
Qualification AEC-Q100 Brand Texas Instruments
Interface Type I2C, SPI Moisture Sensitive Yes
Number of Ports 4 Port Product Type USB Interface IC
Factory Pack Quantity 160 Subcategory Interface ICs
Unit Weight 0.013842 oz


Shipping Method

Our products are mainly transported and delivered by DHL, FedEx, UPS and other logistics partners on site -- Available to 200+ countries.

Delivery Time

The delivery time is usually within 2-7 days, depending on the logistics provider and the area of delivery.

The following are the estimated delivery times of some logistics service providers.

  • DHL

  • Fedex

  • UPS

  • EMS

  • Registered Air Mail


We accept TT prepayment (bank transfer), paypal, credit cards, Western Union, Money Gram.

Checks and other instruments are not supported to pay for orders and customers are required to pay all possible fees, including sales tax,
customs fees, etc.

  • Wire Transfer

  • Paypal

  • Credit Card

  • Western Union

  • Money Gram


Our policies and procedures are designed to ensure compliance with various quality specifications and to quickly resolve quality-related issues.

We promise to provide 365 days quality assurance service for all our products.

If you have any dissatisfaction with the quality of the product you received, you can contact us for a refund or exchange, as long as the product is kept in its original condition.


AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
  • ESD


  • Tape and Reel

    Tape and Reel

  • Cut Tape

    Cut Tape

  • Tube or Tray

    Tube or Tray


You need to log in to reply. Sign In | Sign Up

Buying Guide

  • What is the lifespan of TUSB8041IPAPQ1?

    The lifespan of TUSB8041IPAPQ1 depends on various factors such as the quality of materials used, operating conditions, and the manufacturer's recommended usage time. The datasheet provided by the manufacturer specifies the expected lifespan of the product.

  • Where can I find the full specification of TUSB8041IPAPQ1?

    You can find it with PDF Datasheet for TUSB8041IPAPQ1 on this page. If it is not available, you can contact Avaq at [email protected] to inquire about the Datasheet for this part.

  • How to check the quality of TUSB8041IPAPQ1?

    Avaq has separate quality services with common quality inspection equipment for testing items, you can also fill out a sample form, our team will get in touch with you within 24 HOURS.

  • Can I purchase samples for testing?

    Avaq offers free samples for customers to test. This can often help you determine whether the chip or component meets your needs.

  • Where can I check the delivery after the order is completed?

    Once the order is completed, you will receive an order confirmation email containing a tracking number from AVAQ, then you can track the delivery by yourself.

  • Where to view my order of TUSB8041IPAPQ1 or my history order record?

    You could view all of your orders by logging in or registering AVAQ account. Log in or Register an account now.