This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.


Power Management IC 3V to 6V 48-Pin VQFN EP T/R

TPS651851RSLR General Description

The TPS65185x device is a single-chip power supply designed to for E Ink Vizplex displays used in portable e-reader applications, and the device supports panel sizes up to 9.7 inches and greater. Two high efficiency DC-DC boost converters generate ±16-V rails that are boosted to 22 V and –20 V by two change pumps to provide the gate driver supply for the Vizplex panel. Two tracking LDOs create the ±15-V source driver supplies that support up to 120/200 mA (TPS65185/TPS651851) of output current. All rails are adjustable through the I2C interface to accommodate specific panel requirements.

Accurate back-plane biasing is provided by a linear amplifier that can be adjusted from 0 V to –5.11 V with 9-bit control through the serial interface; it can source or sink current depending on panel condition. The TPS65185x supports automatic panel kickback voltage measurement, which eliminates the need for manual VCOM calibration in the production line. The measurement result can be stored in non-volatile memory to become the new VCOM power-up default value.

TPS65185 is available in two packages, a 48-pin 7-mm × 7-mm2 VQFN (RGZ) with 0.5-mm pitch, and a 48-pin 6-mm × 6-mm2 VQFN (RSL) with 0.4-mm pitch. The TPS651851 is available in a 48-pin 6-mm × 6-mm2 VQFN (RSL) with 0.4-mm pitch.

Key Features

  • Single Chip Power-Management Solution for
    E Ink? Vizplex? Electronic Paper (E-Paper) Displays
  • Generates Positive and Negative Gates, and Source Driver Voltages and Back-Plane Bias From a Single, Low-Voltage Input Supply
  • Supports 9.7-Inch and Larger Panel Sizes
  • 3-V to 6-V Input Voltage Range
  • Boost Converter for Positive Rail Base
  • Inverting Buck-Boost Converter for Negative Rail Base
  • Two Adjustable LDOs for Source Driver Supply
    • TPS65185 LDO1: 15 V, 120 mA (VPOS)
    • TPS65185 LDO2: –15 V, 120 mA (VNEG)
    • TPS651851 LDO1: 15 V, 200 mA at
      VIN ≥ 3.6 V (VPOS)
    • TPS651851 LDO2: –15 V, 200 mA at
      VIN ≥ 3.6 V (VNEG)
  • Accurate Output Voltage Tracking
    • VPOS – VNEG = ±50 mV
  • Two Charge Pumps for Gate Driver Supply
    • CP1: 22 V, 15 mA (VDDH)
    • CP2: –20 V, 15 mA, (VEE)
  • Adjustable VCOM Driver for Accurate Panel-Backplane Biasing
    • 0 V to –5.11 V
    • ± 1.5% accuracy (±10 mV)
    • 9-Bit Control (10-mV Nominal Step Size)
  • Active Discharge on All Rails
  • Integrated 10-Ω, 3.3-V Power Switch for Disabling System Power Rail to E-Ink Panel


Source Content uid TPS651851RSLR Pbfree Code Yes
Part Life Cycle Code Active Reach Compliance Code compliant
Date Of Intro 2016-12-18 Adjustable Threshold YES
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT Input Voltage-Max 5.9 V
Input Voltage-Min 3 V JESD-30 Code S-PQCC-N48
JESD-609 Code e4 Length 6 mm
Moisture Sensitivity Level 3 Number of Channels 4
Number of Functions 1 Number of Outputs 4
Number of Terminals 48 Operating Temperature-Max 85 °C
Operating Temperature-Min -40 °C Peak Reflow Temperature (Cel) 260
Seated Height-Max 1 mm Supply Voltage-Max (Vsup) 5.9 V
Supply Voltage-Min (Vsup) 3 V Supply Voltage-Nom (Vsup) 3.7 V
Surface Mount YES Switching Frequency-Max 1000 kHz
Temperature Grade INDUSTRIAL Terminal Finish NICKEL PALLADIUM GOLD
Terminal Form NO LEAD Terminal Pitch 0.4 mm
Terminal Position QUAD Threshold Voltage-Nom +2.9V
Time@Peak Reflow Temperature-Max (s) 30 Width 6 mm
Regulated outputs (#) 4 Vin (min) (V) 3
Vin (max) (V) 5.9 Iout (max) (A) 0
Configurability Factory programmable Rating Catalog
Step-down DC/DC converter 0 Step-up DC/DC converter 2
LDO 2 Iq (typ) (mA) 5.5
Switching frequency (max) (kHz) 1000 Features Enable, Enable pin, I2C control, Power sequencing, Soft-start adjustable, Thermal shutdown
Operating temperature range (°C) -10 to 85, -40 to 85 Processor name Vizplex
Processor supplier E Ink Shutdown current (ISD) (typ) (µA) 3.5
Switching frequency (typ) (kHz) 1000

Service Policies and Others

After-Sales & Settlement Related

payment Payment

Payment Method

TT/Wire Transfer
Western Union
Money Gram

For alternative payment channels, please reach out to us at:

[email protected]
shipping Shipping & Packing

Shipping Method


AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

Warranty Warranty

We promise to provide 365 days quality assurance service for all our products.


You need to log in to reply. Sign In | Sign Up

In Stock: 6,967

Minimum Order: 1

Qty. Unit Price Ext. Price
1+ - -

The prices below are for reference only.