TPS2835PWP
Driver 3.5A 2-OUT High and Low Side Inv 14-Pin HTSSOP EP Tube
-
Manufacturer: Texas Instruments, Inc
-
Mfr.Part #: TPS2835PWP
-
Datasheet: TPS2835PWP Datasheet (PDF)
-
Package/Case: HTSSOP-14
-
Product Type: Drivers
-
RoHS:
-
Lifecycle: Active
Availability: 3859 pieces
Please fill in the short form below and we will provide you the quotation immediately.
TPS2835PWP General Description
The TPS2834 and TPS2835 are MOSFET drivers for synchronous-buck power stages. These devices are ideal for designing a high-performance power supply using switching controllers that do not include on-chip MOSFET drivers. The drivers are designed to deliver minimum 2-A peak currents into large capacitive loads. The high-side driver can be configured as ground-reference or as floating-bootstrap. An adaptive dead-time control circuit eliminates shoot-through currents through the main power FETs during switching transitions, and provides high efficiency for the buck regulator. The TPS2834 and TPS2835 have additional control functions: ENABLE, SYNC, and CROWBAR. Both high-side and low-side drivers are off when ENABLE is low. The driver is configured as a nonsynchronous-buck driver disabling the low-side driver when SYNC is low. The CROWBAR function turns on the low-side power FET, overriding the IN signal, for overvoltage protection against faulted high-side power FETs.
The TPS2834 has a noninverting input, while the TPS2835 has an inverting input. These drivers are available n 14-terminal SOIC and thermally enhanced TSSOP PowerPAD packages and operate over a junction temperature range of –40°C to 125°C.

Key Features
- Floating Bootstrap or Ground-Reference High-Side Driver
- Adaptive Dead-Time Control
- 50-ns Max Rise/Fall Times With 3.3-nF Load
- 2.4-A Typical Output Current
- 4.5-V to 15-V Supply Voltage Range
- TTL-Compatible Inputs
- Internal Schottky Bootstrap Diode
- SYNC Control for Synchronous or Nonsynchronous Operation
- CROWBAR for OVP, Protects Against Faulted High-Side Power FETs
- Low Supply Current3 mA Typical
- Ideal for High-Current Single or Multiphase Power Supplies
- –40°C to 125°C Operating Virtual Junction Temperature Range
- Available in SOIC and TSSOP PowerPAD Packages
PowerPAD is a trademark of Texas Instruments Incorporated.
DescriptionThe TPS2834 and TPS2835 are MOSFET drivers for synchronous-buck power stages. These devices are ideal for designing a high-performance power supply using switching controllers that do not include on-chip MOSFET drivers. The drivers are designed to deliver minimum 2-A peak currents into large capacitive loads. The high-side driver can be configured as ground-reference or as floating-bootstrap. An adaptive dead-time control circuit eliminates shoot-through currents through the main power FETs during switching transitions, and provides high efficiency for the buck regulator. The TPS2834 and TPS2835 have additional control functions: ENABLE, SYNC, and CROWBAR. Both high-side and low-side drivers are off when ENABLE is low. The driver is configured as a nonsynchronous-buck driver disabling the low-side driver when SYNC is low. The CROWBAR function turns on the low-side power FET, overriding the IN signal, for overvoltage protection against faulted high-side power FETs.
The TPS2834 has a noninverting input, while the TPS2835 has an inverting input. These drivers are available n 14-terminal SOIC and thermally enhanced TSSOP PowerPAD? packages and operate over a junction temperature range of –40°C to 125°C.


Specifications
Category | Integrated Circuits (ICs)Power Management (PMIC)Gate Drivers | Mfr | Texas Instruments |
Series | - | Package | Tube |
Product Status | Active | Digi-Key Programmable | Not Verified |
Driven Configuration | Half-Bridge | Channel Type | Synchronous |
Number of Drivers | 2 | Gate Type | N-Channel MOSFET |
Voltage - Supply | 4.5V ~ 15V | Logic Voltage - VIL, VIH | 1V, 2V |
Current - Peak Output (Source, Sink) | 2.7A, 2.4A | Input Type | Inverting |
High Side Voltage - Max (Bootstrap) | 28 V | Rise / Fall Time (Typ) | 50ns, 40ns |
Operating Temperature | -40°C ~ 125°C (TJ) | Mounting Type | Surface Mount |
Package / Case | 14-PowerTSSOP (0.173", 4.40mm Width) | Supplier Device Package | 14-HTSSOP |
Base Product Number | TPS2835 |
Shipping
Shipping Method
Our products are mainly transported and delivered by DHL, FedEx, UPS and other logistics partners on site -- Available to 200+ countries.
Delivery Time
The delivery time is usually within 2-7 days, depending on the logistics provider and the area of delivery.
The following are the estimated delivery times of some logistics service providers.
-
DHL
-
Fedex
-
UPS
-
EMS
-
Registered Air Mail
Payment
We accept TT prepayment (bank transfer), paypal, credit cards, Western Union, Money Gram.
Checks and other instruments are not supported to pay for orders and customers are required to pay all possible fees, including sales tax,
customs fees, etc.
-
Wire Transfer
-
Paypal
-
Credit Card
-
Western Union
-
Money Gram
Guarantees
Our policies and procedures are designed to ensure compliance with various quality specifications and to quickly resolve quality-related issues.We promise to provide 365 days quality assurance service for all our products.
If you have any dissatisfaction with the quality of the product you received, you can contact us for a refund or exchange, as long as the product is kept in its original condition.
Packing
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.-
ESD
-
Tape and Reel
-
Cut Tape
-
Tube or Tray
Buying Guide
-
What is the lifespan of TPS2835PWP?
The lifespan of TPS2835PWP depends on various factors such as the quality of materials used, operating conditions, and the manufacturer's recommended usage time. The datasheet provided by the manufacturer specifies the expected lifespan of the product.
-
Where can I find the full specification of TPS2835PWP?
You can find it with PDF Datasheet for TPS2835PWP on this page. If it is not available, you can contact Avaq at [email protected] to inquire about the Datasheet for this part.
-
How to check the quality of TPS2835PWP?
Avaq has separate quality services with common quality inspection equipment for testing items, you can also fill out a sample form, our team will get in touch with you within 24 HOURS.
-
Can I purchase samples for testing?
Avaq offers free samples for customers to test. This can often help you determine whether the chip or component meets your needs.
-
Where can I check the delivery after the order is completed?
Once the order is completed, you will receive an order confirmation email containing a tracking number from AVAQ, then you can track the delivery by yourself.
-
Where to view my order of TPS2835PWP or my history order record?
You could view all of your orders by logging in or registering AVAQ account. Log in or Register an account now.
Availability: 3859 pieces
Please fill in the short form below and we will provide you the quotation immediately.
Top Sellers
-
DRV8340SPHPRQ1
Texas Instruments, Inc
Brushless DC Motor Driver
-
TPS54262MPWPTEP
Texas Instruments, Inc
Conv DC-DC 3.6V to 48V Synchronous Step Down Single-Out 0.9V to 18V 2A Automotive 20-Pin HTSSOP EP T/R
-
DRV8340HPHPRQ1
Texas Instruments, Inc
Brushless DC Motor Driver
-
TPS2833D
Texas Instruments, Inc
Driver 3.5A 2-OUT High and Low Side Inv 8-Pin SOIC Tube
-
SI8233AB-D-IM
Skyworks Solutions, Inc
isolated driver
-
UCC2813QDR-4Q1
Texas Instruments, Inc
Current Mode PWM Controller 1A 1000kHz Automotive 8-Pin SOIC T/R