This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.


Driver 3.5A 2-OUT High and Low Side Non-Inv 14-Pin SOIC Tube

Inquiry Add To Bom

TPS2830D General Description

The TPS2830 and TPS2831 are MOSFET drivers for synchronous-buck power stages. These devices are ideal for designing a high-performance power supply using switching controllers that do not have MOSFET drivers. The drivers are designed to deliver 2.4-A peak currents into large capacitive loads. The high-side driver can be configured as a ground-reference driver or as a floating bootstrap driver. An adaptive dead-time control circuit eliminates shoot-through currents through the main power FETs during switching transitions, providing higher efficiency for the buck regulator. The TPS2830/31 drivers have additional control functions: ENABLE, SYNC, and CROWBAR. Both drivers are off when ENABLE is low. The driver is configured as a nonsynchronous-buck driver, disabling the low side driver when SYNC is low. The CROWBAR function turns on the low-side power FET, overriding the IN signal, for over-voltage protection against faulted high-side power FETs.

The TPS2830 has a noninverting input. The TPS2831 has an inverting input. The TPS2830/31 drivers are available in 14-terminal SOIC and thermally-enhanced TSSOP PowerPADE packages, and operate over a virtual junction temperature range of \x9640°C to 125°C.

Texas Instruments, Inc Inventory

Key Features

  • Floating Bootstrap or Ground-Reference High-Side Driver
  • Adaptive Dead-Time Control
  • 50-ns Max Rise/Fall Times and 100-ns Max Propagation Delay \x96 3.3-nF Load
  • Ideal for High-Current Single or Multiphase Power Supplies
  • 2.4-A Typical Peak Output Current
  • 4.5-V to 15-V Supply Voltage Range
  • Internal Schottky Bootstrap Diode
  • SYNC Control for Synchronous or Nonsynchronous Operation
  • CROWBAR for OVP, Protects Against Faulted High-Side Power FETs
  • Low Supply Current3-mA Typical
  • Available in SOIC and TSSOP PowerPAD Packages
Texas Instruments, Inc Original Stock
Texas Instruments, Inc Inventory


Category Integrated Circuits (ICs)Power Management (PMIC)Gate Drivers Mfr Texas Instruments
Series - Package Tube
Product Status Active Digi-Key Programmable Not Verified
Driven Configuration High-Side Channel Type Synchronous
Number of Drivers 2 Gate Type N-Channel MOSFET
Voltage - Supply 4.5V ~ 15V Logic Voltage - VIL, VIH -
Current - Peak Output (Source, Sink) 2.7A, 2.4A Input Type Non-Inverting
High Side Voltage - Max (Bootstrap) 28 V Rise / Fall Time (Typ) 50ns, 50ns
Operating Temperature -40°C ~ 125°C (TJ) Mounting Type Surface Mount
Package / Case 14-SOIC (0.154", 3.90mm Width) Supplier Device Package 14-SOIC
Base Product Number TPS2830


Shipping Method

Our products are mainly transported and delivered by DHL, FedEx, UPS and other logistics partners on site -- Available to 200+ countries.

Delivery Time

The delivery time is usually within 2-7 days, depending on the logistics provider and the area of delivery.

The following are the estimated delivery times of some logistics service providers.

  • DHL

  • Fedex

  • UPS

  • EMS

  • Registered Air Mail


We accept TT prepayment (bank transfer), paypal, credit cards, Western Union, Money Gram.

Checks and other instruments are not supported to pay for orders and customers are required to pay all possible fees, including sales tax,
customs fees, etc.

  • Wire Transfer

  • Paypal

  • Credit Card

  • Western Union

  • Money Gram


Our policies and procedures are designed to ensure compliance with various quality specifications and to quickly resolve quality-related issues.

We promise to provide 365 days quality assurance service for all our products.

If you have any dissatisfaction with the quality of the product you received, you can contact us for a refund or exchange, as long as the product is kept in its original condition.


AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
  • ESD


  • Tape and Reel

    Tape and Reel

  • Cut Tape

    Cut Tape

  • Tube or Tray

    Tube or Tray


You need to log in to reply. Sign In | Sign Up

Buying Guide

  • What is the lifespan of TPS2830D?

    The lifespan of TPS2830D depends on various factors such as the quality of materials used, operating conditions, and the manufacturer's recommended usage time. The datasheet provided by the manufacturer specifies the expected lifespan of the product.

  • Where can I find the full specification of TPS2830D?

    You can find it with PDF Datasheet for TPS2830D on this page. If it is not available, you can contact Avaq at [email protected] to inquire about the Datasheet for this part.

  • How to check the quality of TPS2830D?

    Avaq has separate quality services with common quality inspection equipment for testing items, you can also fill out a sample form, our team will get in touch with you within 24 HOURS.

  • Can I purchase samples for testing?

    Avaq offers free samples for customers to test. This can often help you determine whether the chip or component meets your needs.

  • Where can I check the delivery after the order is completed?

    Once the order is completed, you will receive an order confirmation email containing a tracking number from AVAQ, then you can track the delivery by yourself.

  • Where to view my order of TPS2830D or my history order record?

    You could view all of your orders by logging in or registering AVAQ account. Log in or Register an account now.