This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

TL084IN +BOM

High slew rate of 13-V/µs

Manufacturer:

Texas Instruments
Mfr.Part #:

TL084IN
Datasheet:

TL084IN Datasheet (PDF)
Number Of Channels:

4
Total Supply Voltage (+5 V = 5, ±5 V = 10) (max) (V):

30
Total Supply Voltage (+5 V = 5, ±5 V = 10) (min) (V):

7
Rail-to-rail:

In to V+
EDA/CAD Models:

Request Free CAD Models for TL084IN

TL084IN Information

General Description

The TL084IN is a high-performance quad JFET-input operational amplifier. It is part of the TL08x series of precision operational amplifiers and features low input bias and offset currents, high slew rate, and a wide bandwidth. The TL084IN operates over a supply voltage range of ±5V to ±15V and can output a maximum peak-to-peak voltage of 26V.This operational amplifier is suitable for applications that require high input impedance, low noise, and high output drive capability, such as audio amplifiers, precision instrumentation, and active filters. The TL084IN has four independent operational amplifiers in a single package, allowing for significant space-saving in circuit design.The TL084IN is available in an 14-pin dual in-line package, making it easy to integrate into various circuit designs. It has a temperature range of -40°C to 125°C, making it suitable for a wide range of operating conditions.

Key Features

Fast response time: 5 µs
Fault-tolerant architecture
Safe for high-reliability applications
Wide operating temperature range
Low power consumption: 10 mW
Robust against electromagnetic interference

Application

The TL084IN is commonly used in applications such as audio amplifiers, voltage followers, voltage regulators, signal processing, instrumentation, and control systems

It can also be used in audio mixers, active filters, precision rectifiers, and voltage comparators

Specifications

Number of channels	4	Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)	30
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)	7	Rail-to-rail	In to V+
GBW (typ) (MHz)	3	Slew rate (typ) (V/µs)	13
Vos (offset voltage at 25°C) (max) (mV)	6	Iq per channel (typ) (mA)	1.4
Vn at 1 kHz (typ) (nV√Hz)	18	Rating	Catalog
Operating temperature range (°C)	-40 to 125, -40 to 85, 0 to 70	Offset drift (typ) (µV/°C)	18
Features	Standard Amps	Input bias current (max) (pA)	200
CMRR (typ) (dB)	86	Iout (typ) (A)	0.01
Architecture	FET	Input common mode headroom (to negative supply) (typ) (V)	3
Input common mode headroom (to positive supply) (typ) (V)	0	Output swing headroom (to negative supply) (typ) (V)	1.5
Output swing headroom (to positive supply) (typ) (V)	-1.5	Package/Case	PDIP-14