



Images are for reference only See technical specifications
In Stock: 7,699
TC4423CPA: 3A Dual Gate Drivers
TC4423CPA
Active
The TC4423CPA is a low-side gate driver IC from Microchip Technology, designed for pulse-width modulation (PWM) control applications. It's an inverting driver that can handle high-frequency PWM signals up to 1 MHz. The device features a fault detection and auto-recovery mechanism, making it suitable for use in motor control, inverters, switching power supplies, DC/DC converters, LED drivers, buck/boost converters, and other power management systems. The TC4423CPA operates over a wide temperature range of -40°C to 125°C and has low power consumption. Its compact PDIP-8 package makes it easy to integrate into various applications. The device is suitable for use in automotive and industrial automation applications where high reliability and robustness are required.
The package type of TC44-23CPA is PDIP-8 (Plastic Dual In-Line Package, 8-pin).
The TC4423CPA is an 8-pin low-side gate driver IC with the following pinout:
The IC is designed for pulse-width modulation (PWM) control of DC motors, solenoids, and other inductive loads. It features a high-current output stage that can sink up to 1.5A and has a low input current requirement. The IN pin receives the PWM signal, which is then amplified and sent to the OUT pin to drive the load.
The manufacturer of the TC44-23CPA is Microchip Technology, a leading provider of microcontroller, memory, and analog semiconductors.
The TC4423CPA is a low-side gate driver IC, suitable for various applications such as motor control, PWM control, inverters, switching power supplies, DC/DC converters, LED drivers, buck/boost converters, and power management systems. It can also be used in automotive and industrial automation applications where precise control and fault detection are required.
The equivalent products of TC4423CPA are:
These ICs are low-side gate drivers, similar to the TC4423CPA, and can be used in motor control, PWM control, and other applications.
Category | Integrated Circuits (ICs)Power Management (PMIC)Gate Drivers | Programmable | Not Verified |
---|---|---|---|
Driven Configuration | Low-Side | Channel Type | Independent |
Number of Drivers | 2 | Gate Type | N-Channel, P-Channel MOSFET |
Voltage - Supply | 4.5V ~ 18V | Logic Voltage - VIL, VIH | 0.8V, 2.4V |
Current - Peak Output (Source, Sink) | 3A, 3A | Input Type | Inverting |
Rise / Fall Time (Typ) | 23ns, 25ns | Operating Temperature | 0°C ~ 150°C (TJ) |
Mounting Type | Through Hole | Base Product Number | TC4423 |
Product Category | Gate Drivers | Product | MOSFET Gate Drivers |
Type | Low-Side | Mounting Style | Through Hole |
Number of Outputs | 2 Output | Output Current | 3 A |
Supply Voltage - Min | 4.5 V | Supply Voltage - Max | 18 V |
Configuration | Inverting | Rise Time | 12 ns |
Fall Time | 12 ns | Minimum Operating Temperature | 0 C |
Maximum Operating Temperature | + 70 C | Logic Type | CMOS, TTL |
Operating Supply Current | 2.5 mA | Operating Supply Voltage | 4.5 V to 18 V |
Pd - Power Dissipation | 730 mW | Product Type | Gate Drivers |
Factory Pack Quantity | 60 | Subcategory | PMIC - Power Management ICs |
Technology | Si | Unit Weight | 0.032805 oz |
Package/Case | DIP8 |
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
We promise to provide 365 days quality assurance service for all our products.
Returns and exchanges are supported, provided the items remain in their original condition.
04/23/2024
Corresponds to the claimed. Exalo seven days (
02/26/2021
In the city of dnepr the parcel reached in 19 days. The appearance of the leds corresponds to the description and photos on the site. The tape with leds is packed in a paper bag-all whole. Bought to repair the backlight of the tv, but the leds themselves have not yet checked and did not put in the tv.
02/13/2021
As good a partner you could find.
11/07/2020
Came quickly, alerted a couple of small things. 1. the firmware is loaded only if choose "old bootloader" in arduino ide. 2. when first connected to power, the tx led blinked, instead of the 13th led and blinked it until i poured a new sketch. 3. led power green, instead of standard red.
HK warehouse
(HKT)
Call for availability
*Lead times apply to standard orders and are based on business days only. Please contact us for details.
ESD
Tape and Reel
Cut Tape
Tube or Tray