This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

STM32F777NIH6 +BOM

ARM® Cortex®-M7 STM32F7 Microcontroller IC 32-Bit Single-Core 216MHz 2MB (2M x 8) FLASH 216-TFBGA (13x13)

  • Manufacturer:

    ST

  • Mfr.Part #:

    STM32F777NIH6

  • Datasheet:

    STM32F777NIH6 Datasheet (PDF) pdf-icon

  • Part Life Cycle Code:

    Active

  • Reach Compliance Code:

    compliant

  • ECCN Code:

    5A992.C

  • HTS Code:

    8542.31.00.01

STM32F777NIH6 General Description

The STM32F777NIH6 devices are based on the high-performance Arm®Cortex®-M7 32-bit RISC core operating at up to 216 MHz frequency. The Cortex®-M7 core features a floating point unit (FPU) which supports Arm® double-precision and single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances the application security.The STM32F777NIH6 devices incorporate high-speed embedded memories with a Flash memory up to 2 Mbytes, 512 Kbytes of SRAM (including 128 Kbytes of Data TCM RAM for critical real-time data), 16 Kbytes of instruction TCM RAM (for critical real-time routines), 4 Kbytes of backup SRAM available in the lowest power modes, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses, a 32-bit multi-AHB bus matrix and a multi layer AXI interconnect supporting internal and external memories access.All the devices offer three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers, a true random number generator (RNG), and a cryptographic acceleration cell. They also feature standard and advanced communication interfaces.Advanced peripherals include two SDMMC interfaces, a flexible memory control (FMC) interface, a Quad-SPI Flash memory interface, a camera interface for CMOS sensors and a cryptographic acceleration cell.The STM32F777NIH6 devices operate in the –40 to +105 °C temperature range from a 1.7 to 3.6 V power supply. Dedicated supply inputs for USB (OTG_FS and OTG_HS) and SDMMC2 (clock, command and 4-bit data) are available on all the packages except LQFP100 for a greater power supply choice.The supply voltage can drop to 1.7 V with the use of an external power supply supervisor. A comprehensive set of power-saving mode allows the design of low-power applications.The STM32F777NIH6 devices offer devices in 11 packages ranging from 100 pins to 216 pins. The set of included peripherals changes with the device chosen.These features make the STM32F777NIH6 microcontrollers suitable for a wide range of applications.Evaluation board with STM32F769NI MCU.ST-LINK/V2 in-circuit debugger/programmer for ST.

Key Features

  • Core: Arm® 32-bit Cortex®-M7 CPU with DPFPU, ART Accelerator™ and L1-cache: 16 Kbytes I/D cache, allowing 0-wait state execution from embedded Flash and external memories, up to 216 MHz, MPU, 462 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1), and DSP instructions.
  • Memories
    • Up to 2 Mbytes of Flash memory organized into two banks allowing read-while-write
    • SRAM: 512 Kbytes (including 128 Kbytes of data TCM RAM for critical real-time data) + 16 Kbytes of instruction TCM RAM (for critical real-time routines) + 4 Kbytes of backup SRAM
    • Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, NOR/NAND memories
  • Dual mode Quad-SPI
  • Graphics
    • Chrom-ART Accelerator™ (DMA2D), graphical hardware accelerator enabling enhanced graphical user interface
    • Hardware JPEG codec
    • LCD-TFT controller supporting up to XGA resolution
    • MIPI® DSI host controller supporting up to 720p 30 Hz resolution
  • Clock, reset and supply management
    • 1.7 V to 3.6 V application supply and I/Os
    • POR, PDR, PVD and BOR
    • Dedicated USB power
    • 4-to-26 MHz crystal oscillator
    • Internal 16 MHz factory-trimmed RC (1% accuracy)
    • 32 kHz oscillator for RTC with calibration
    • Internal 32 kHz RC with calibration
  • Low-power
    • Sleep, Stop and Standby modes
    • VBAT supply for RTC, 32×32 bit backup registers + 4 Kbytes backup SRAM
  • 3×12-bit, 2.4 MSPS ADC: up to 24 channels
  • Digital filters for sigma delta modulator (DFSDM), 8 channels / 4 filters
  • 2×12-bit D/A converters
  • General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
  • Up to 18 timers: up to thirteen 16-bit (1x low- power 16-bit timer available in Stop mode) and two 32-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input. All 15 timers runni

Specifications

Source Content uid STM32F777NIH6 Part Life Cycle Code Active
Reach Compliance Code compliant ECCN Code 5A992.C
HTS Code 8542.31.00.01 Factory Lead Time 53 Weeks, 1 Day
Date Of Intro 2017-09-12 Has ADC YES
Address Bus Width 26 Bit Size 32
Boundary Scan YES CPU Family CORTEX-M7
Clock Frequency-Max 50 MHz DAC Channels YES
DMA Channels YES External Data Bus Width 32
Format FLOATING POINT Integrated Cache YES
JESD-30 Code S-PBGA-B216 JESD-609 Code e1
Length 13 mm Low Power Mode YES
Moisture Sensitivity Level 3 Number of DMA Channels 16
Number of External Interrupts 16 Number of I/O Lines 159
Number of Serial I/Os 8 Number of Terminals 216
Number of Timers 16 On Chip Data RAM Width 8
On Chip Program ROM Width 8 Operating Temperature-Max 85 °C
Operating Temperature-Min -40 °C PWM Channels YES
Peak Reflow Temperature (Cel) 260 RAM (bytes) 544768
ROM (words) 2097152 ROM Programmability FLASH
Seated Height-Max 1.1 mm Speed 216 MHz
Supply Current-Max 100 mA Supply Voltage-Max 3.6 V
Supply Voltage-Min 1.7 V Supply Voltage-Nom 1.8 V
Surface Mount YES Technology CMOS
Temperature Grade INDUSTRIAL Terminal Finish TIN SILVER COPPER
Terminal Form BALL Terminal Pitch 0.8 mm
Terminal Position BOTTOM Width 13 mm
uPs/uCs/Peripheral ICs Type MICROCONTROLLER, RISC

Service Policies and Others

After-Sales & Settlement Related

payment Payment

Payment Method

hsbc
TT/Wire Transfer
paypal
Paypal
wu
Western Union
mg
Money Gram

For alternative payment channels, please reach out to us at:

[email protected]
shipping Shipping & Packing

Shipping Method

fedex
Fedex
ups
UPS
dhl
DHL
tnt
NTN
Packing

AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

Warranty Warranty

We promise to provide 365 days quality assurance service for all our products.

Reviews

You need to log in to reply. Sign In | Sign Up

In Stock: 7,128

Minimum Order: 1

Qty. Unit Price Ext. Price
1+ - -

The prices below are for reference only.