This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

SN75ALS192N

Quadruple Differential Line Driver

Inquiry Add To Bom

SN75ALS192N General Description

The four differential line drivers are designed for data transmission over twisted-pair or parallel-wire transmission lines. They meet the requirements of ANSI Standard EIA/TIA-422-B and ITU Recommendations V.11 and are compatible with 3-state TTL circuits. Advanced low-power Schottky technology provides high speed without the usual power penalties. Standby supply current is typically only 26 mA, while typical propagation delay time is less than 10 ns.

High-impedance inputs maintain low input currents, less than 1 uA for a high level and less than 100 uA for a low level. Complementary output-enable inputs (G and G\) allow these devices to be enabled at either a high input level or low input level. The SN75ALS192 is capable of data rates in excess of 20 Mbit/s and is designed to operate with the SN75ALS193 quadruple line receiver.

The SN75ALS192 is characterized for operation from 0°C to 70°C.

H = high level, L = low level, X = irrelevant, Z = high impedance (off)

Texas Instruments, Inc Inventory

Key Features

  • Meets or Exceeds the Requirements of ANSI Standard EIA/TIA-422-B and ITU Recommendation V.11
  • Designed to Operate up to 20 Mbaud
  • 3-State TTL Compatible
  • Single 5-V Supply Operation
  • High Output Impedance in Power-Off Condition
  • Complementary Output-Enable Inputs
  • Improved Replacement for the AM26LS31
Texas Instruments, Inc Original Stock
Texas Instruments, Inc Inventory

Specifications

Category Integrated Circuits (ICs)InterfaceDrivers, Receivers, Transceivers Mfr Texas Instruments
Series - Package Tube
Product Status Active Type Driver
Protocol RS422, RS485 Number of Drivers/Receivers 4/0
Duplex - Data Rate -
Voltage - Supply 4.75V ~ 5.25V Operating Temperature 0°C ~ 70°C
Mounting Type Through Hole Package / Case 16-DIP (0.300", 7.62mm)
Supplier Device Package 16-PDIP Base Product Number 75ALS192
Number of receivers 0 Number of transmitters 4
Supply voltage (nom) (V) 5 Signaling rate (max) (MBits) 20
IEC 61000-4-2 contact (±V) None Fault protection (V) -12 to 12
Common-mode range (V) -3 to 3 Number of nodes 32
Isolated No Supply current (max) (µA) 45000
Rating Catalog Operating temperature range (°C) 0 to 70
feature-function Line Transmitter feature-data-rate 20MBd
feature-transmitter-communication-type RS-422 feature-receiver-communication-type
feature-number-of-transceivers feature-number-of-transmitters 4
feature-number-of-receivers feature-transmitter-signal-type Differential
feature-receiver-signal-type feature-number-of-drivers-per-line 1
feature-number-of-receivers-per-line feature-driving-mode 3-State
feature-power-supply-type Single feature-minimum-single-supply-voltage-v 4.75
feature-maximum-single-supply-voltage-v 5.25 feature-minimum-dual-supply-voltage-v
feature-maximum-dual-supply-voltage-v feature-maximum-supply-current-ma 45
feature-packaging Tube feature-rad-hard
feature-pin-count 16 feature-supplier-package PDIP
feature-standard-package-name DIP feature-cecc-qualified No
feature-esd-protection feature-escc-qualified
feature-military No feature-aec-qualified No
feature-aec-qualified-number feature-eccn-code EAR99
feature-svhc No feature-svhc-exceeds-threshold No

Service Policies and Others

After-Sales & Settlement Related

payment Payment

We accept TT prepayment (bank transfer), paypal, credit cards, Western Union, Money Gram.

If you have specific preferences or requirements for payment channels, please contact our sales team. 

customers are required to pay all possible fees, including sales tax,customs fees, etc.

shipping Shipping And Packing
Shipping Method

Our products are mainly transported and delivered by DHL, FedEx, UPS and other logistics partners on site -- Available to 200+ countries.

Packing

AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

warranty Warranty & Returns

Our policies and procedures are designed to ensure compliance with various quality specifications and to quickly resolve quality-related issues.

We promise to provide 365 days quality assurance service for all our products.

If you have any dissatisfaction with the quality of the product you received, you can contact us for a refund or exchange, as long as the product is kept in its original condition.

Ratings and Reviews

More
Z
Z**r 12/27/2022

Replaces NEReN8 or NESdn8 capacitor on HP Pavilion dv7-4090eb

11
Z
Z**y 07/27/2022

Received lack of proof

11
M
M**n 05/17/2022

Capacitance is lower than marked but withing specification.

19
M
M**h 10/15/2021

The product corresponds to the description. Shipping 40 days recommend seller ordered second time

5

Reviews

You need to log in to reply. Sign In | Sign Up