



Images are for reference only See technical specifications
In Stock: 5,203
A=B,A>B 30ns@5V,45pF 4.85V~5.25V 8 PDIP-20 Digital Comparators ROHS
SN74LS682N
PDIP (N)-20
Active
Here's a concise introduction to the SN74LS682N: The Texas Instruments SN74LS682N is an 8-bit magnitude comparator in a totem-pole or open-collector configuration. It compares two 8-bit words and provides an output indicating which word has the larger magnitude. The IC features hysteresis at its P and Q inputs, ensuring stable operations. The comparison can be made between two 8-bit words with equal length and polarity. The SN74LS682N is packaged in a dual-in-line package (PDIP) with 20 leads and has additional features such as pullup resistors on the Q input pins. This device is suitable for digital signal processing, computer interfaces, and industrial control applications where accurate comparison of data is required.
The SN74LS682N is a magnitude comparator that compares two 8-bit words. Its features include:
It's a useful component for digital circuits that require comparing binary numbers.
The package type of SN74LS682N is Dual-In-Line Packages (DIP) - 20 lead pdip.
The manufacturer of the SN74LS682N is Texas Instruments (TI). TI is a US-based technology company that specializes in producing semiconductor components, including microprocessors, power management devices, and interface products. The company was founded in 1930 and has become one of the leading players in the global semiconductor industry.
The equivalent products of SN74LS682N are:
These ICs are all magnitude comparators with similar functionality to the SN74LS682N, but may have different package types or voltage ratings.
Number of channels | 8 | Technology family | LS |
---|---|---|---|
Input type | Schmitt-Trigger | Output type | Push-Pull |
Features | High speed (tpd 10-50ns) | Operating temperature range (°C) | 0 to 70 |
Rating | Catalog | Package/Case | PDIP (N)-20 |
1.Q: Are there related parts or alternatives to the Motorola 74LS 8-bit comparator?
A: Similar parts include 74HC (CMOS) series comparators or modern equivalents like SN74LS682. Always verify pin compatibility and voltage requirements.
2.Q: What are the electrical characteristics of the 74LS comparator’s outputs?
A: Outputs provide 24mA sink current (low) and -0.4mA source current (high), with totem-pole output type for direct TTL compatibility.
3.Q: What is the package type and dimensions of the Motorola 74LS DIP20 IC?
A: It comes in a 20-pin PDIP (Plastic DIP) package: max length 26.92mm, width 6.6mm, and height 5.08mm, suitable for through-hole mounting.
4.Q: What are the recommended operating conditions for the 74LS comparator?
A: Operate at 4.85–5.25V DC, 0–70°C ambient temperature, with 45pF test load for specified propagation delay (30ns typical).
5.Q: What are the absolute maximum ratings for the 74LS DIP20 comparator?
A: Absolute max ratings include 7V supply voltage, 70°C max operating temperature, and 24mA low-level output current. Exceeding these may damage the device.
6.Q: In what applications is the Motorola 74LS 8-bit comparator typically used?
A: It’s used in digital systems for arithmetic operations, address decoding, process control, and applications requiring binary value comparison (e.g., test equipment, industrial controllers).
7.Q: What are the key features of the 74LS 8-bit comparator from Motorola?
A: Key features include 8-bit magnitude comparison, totem-pole outputs, 30ns propagation delay, 4.75–5.25V operating voltage, and LS (Low-Power Schottky) logic family compatibility.
8.Q: What is the pinout configuration of the Motorola 74LS 8-bit magnitude comparator (DIP20)?
A: The pinout follows standard 20-pin DIP layout, with inputs (A0-A7, B0-B7), outputs (A>B, A=B), power supply (VCC: pin 20, GND: pin 10), and control pins (e.g., cascading inputs). Refer to the datasheet for a detailed diagram.
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
We promise to provide 365 days quality assurance service for all our products.
Returns and exchanges are supported, provided the items remain in their original condition.
01/30/2024
It was a pleasure to deal with Daniel and Gilles.They act quick, friendly and down to earth. We are looking forward to do more business with avaq Electroniques.Thank you.
12/15/2023
On small currents everything is ok. Will work on universal charger.
04/07/2023
Good product with reasonable price. Thanks, seller!
12/17/2020
Fast shipping good!!!
HK warehouse
(HKT)
Call for availability
*Lead times apply to standard orders and are based on business days only. Please contact us for details.
ESD
Tape and Reel
Cut Tape
Tube or Tray