



Images are for reference only See technical specifications
In Stock: 5,352
Two high-isolation channels ensure accurate data transmission and robust protection
PC824
8-DIP (0.300", 7.62mm)
The PC824 is an optoisolator from Sharp Microelectronics. It's designed for high voltage isolation, with a transistor output capable of handling up to 5000Vrms. The device comes in a DIP-8 package and is commonly used in applications requiring secure signal transmission between circuits.
The PC824, an optoisolator from Sharp Microelectronics, features key attributes:
These features make the PC824 suitable for applications requiring robust signal isolation and dual-channel functionality.
The PC824 has a Package type of DIP-8, which stands for Dual In-line Package with eight pins.
The PC824 is an optoisolator with a transistor output. It has two channels, each operating independently. The device comes in an 8-pin DIP (dual inline package) package.
In terms of pin functions:
Vcc (Power): Positive supply voltage.
GND (Ground): Negative reference and return current path.
HT (High Trigger): Input to activate the optocoupler output.
LT (Low Trigger): Similar to HT but for the second channel.
SO (Output 1): Transistor output from the first channel, typically an emitter follower.
SI (Output 2): Similar to SO, but for the second channel.
Please note that actual circuit behavior might differ due to additional components or specific design requirements.
The manufacturer of the PC824 is Sharp Microelectronics. Sharp is a multinational electronics corporation, known for its innovation in various technologies.
The PC824, an optoisolator, finds applications in isolated digital communications, industrial control systems, and safety circuits where high voltage isolation is crucial.
The equivalent products for PC824, a 5000Vrms optoisolator with transistor output, might include similar devices from Sharp Microelectronics or other manufacturers like STMicroelectronics or Texas Instruments. These would have similar isolation capabilities and transistor outputs for industrial control applications.
Product Category | Sharp Microelectronics |
---|
1.Q: Are there any related parts to the Sharp PC824?
A: Similar alternatives include the PC817 (single-channel) or the PC827 (dual-channel) series, but verify compatibility for your application.
2.Q: Does the Sharp PC824 meet any industry certification standards?
A: While not explicitly stated, optocouplers like the PC824 typically comply with safety standards such as UL, IEC, and VDE for isolation (5000Vrms).
3.Q: What package does the Sharp PC824 optocoupler use?
A: It comes in an 8-pin DIP (Dual In-line Package) with 0.300" (7.62mm) row spacing, suitable for through-hole PCB mounting.
4.Q: What is the current transfer ratio (CTR) range of the Sharp PC824?
A: The CTR ranges from a minimum of 20% to a maximum of 300% at 1mA forward current, ensuring signal amplification consistency.
5.Q: What are the recommended operating conditions for the Sharp PC824?
A: For reliable operation, use within 1mA to 50mA input current (If), output current (Ic) ≤50mA per channel, and ensure Vce does not exceed 35V.
6.Q: What are the absolute maximum ratings for the Sharp PC824?
A: Max ratings include 50mA forward current (If), 35V output voltage (Vce), and an operating temperature range of -30°C to 100°C. Exceeding these may damage the device.
7.Q: What are typical applications for the Sharp PC824 optocoupler?
A: Common uses include signal isolation in power supplies, industrial controls, PLCs, and digital logic interfaces where noise immunity and voltage isolation are required.
8.Q: What are the key features of the Sharp PC824 optocoupler?
A: Key features include dual-channel AC/DC input, transistor output, 5000Vrms isolation, CTR range of 20%-300% @1mA, 35V output voltage, and a compact 8-DIP package.
9.Q: What is the pinout configuration of the Sharp PC824 optocoupler?
A: The PC824 is an 8-pin DIP dual optocoupler. Pin 1 and Pin 8 are the anodes of the input LEDs, while Pins 2 and 7 are the cathodes. The output transistors are connected to Pins 5 & 6 (collectors) and Pins 3 & 4 (emitters).
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
We promise to provide 365 days quality assurance service for all our products.
Returns and exchanges are supported, provided the items remain in their original condition.
HK warehouse
(HKT)
Call for availability
*Lead times apply to standard orders and are based on business days only. Please contact us for details.
ESD
Tape and Reel
Cut Tape
Tube or Tray