This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

OPB700ALZ +BOM

Photointerrupter Reflective Phototransistor 4-Pin

Manufacturer:

TT Electronics/Optek Technology
Mfr.Part #:

OPB700ALZ
Datasheet:

OPB700ALZ Datasheet (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Transferred
Reach Compliance Code:

compliant
Body Breadth:

15.24 mm
EDA/CAD Models:

Request Free CAD Models for OPB700ALZ

Description

The OPB700ALZ is an optical switch from Optek, a reflective phototransistor output device with a photodiode input diode. It's a pre-wired module designed for various applications. This component uses light to detect the presence or absence of an object and outputs a signal accordingly. In simple terms, the OPB700ALZ is an optical sensor that can be used in a wide range of applications where detecting the presence or absence of an object is necessary. It's commonly used in industrial automation, medical devices, consumer electronics, and other areas where reliable detection is crucial.

Package

The package type of OPB700ALZ is a Module, which means it's a pre-wired package, making it easier to incorporate into your design without needing additional housing or wiring.

Pinout

Based on the product information provided, I found that the OPB700ALZ is an optical switch with a phototransistor output.

The pin count for OPB700ALZ is not explicitly stated in the product description. However, as it's a pre-wired module, we can infer that it likely has a standard 6-pin or 8-pin configuration common to many optocouplers and optical switches.

As for the function, based on the description, I would assume that:

Pin 1: Input Diode (phototransistor)
Pin 2-5: Output Phototransistor
Pin 6: VCC or GND (depending on the specific module configuration)

Please note that this is an educated guess and may not be entirely accurate without further documentation from the manufacturer.

Manufacturer

The manufacturer of the OPB700ALZ is Optek, a semiconductor component provider.

Equivalent

Based on Optek's product description, the OPB700ALZ is an optical switch with a phototransistor output and reflective photodetector input diode. Equivalent products may include:

Analog Devices ADNS9870
NXP Semiconductors TLP485A
Hamamatsu Corp. S1012-01

These equivalents share similar characteristics such as optical detection, transistor outputs, and module packaging. Note that exact equivalent products may vary depending on specific requirements and specifications.

Specifications

Pbfree Code	Yes	Part Life Cycle Code	Transferred
Reach Compliance Code	compliant	Body Breadth	15.24 mm
Body Height	2.54 mm	Body Length or Diameter	25.4 mm
Gap Size	5.08 mm	Housing	PLASTIC
Measurement Range-Max (mm)	5.08 mm	Measurement Range-Min (mm)	5.08 mm
Mounting Feature	THROUGH HOLE MOUNT	Number of Channels	1
Operating Current-Max	100 mA	Operating Temperature-Max	100 °C
Operating Temperature-Min	-40 °C	Output Circuit Type	Transistor
Output Range	0.10-2.50mA	Output Type	ANALOG CURRENT
Output Voltage-Max	24 V	Sensors/Transducers Type	LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE
Supply Voltage-Max	1.7 V	Surface Mount	NO
Termination Type	SOLDER	VCEsat-Max	0.4 V
Product Category	Optical Switches, Reflective, Phototransistor Output	Sensing Distance	5.08 mm
Collector- Emitter Voltage VCEO Max	25 V	Maximum Collector Current	2.5 mA
Vf - Forward Voltage	1.7 V	Vr - Reverse Voltage	2 V
Minimum Operating Temperature	- 40 C	Maximum Operating Temperature	+ 100 C
Mounting Style	Wire Leads	Height	25.4 mm
If - Forward Current	100 mA	Length	15.24 mm
Pd - Power Dissipation	80 mW	Product Type	Optical Switches, Reflective, Phototransistor Output
Sensing Method	Reflective	Factory Pack Quantity	100
Subcategory	Optical Switches	Wavelength	890 nm
Width	2.54 mm	Unit Weight	0.169200 oz
Package/Case	Module