This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

OPA325IDBVR +BOM

Low noise (10nV/rtHz), wide bandwidth (10MHz), low power (0.65mA), zero crossover op amp

Manufacturer:

TI
Mfr.Part #:

OPA325IDBVR
Datasheet:

OPA325IDBVR Datasheet (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Active
Reach Compliance Code:

compliant
ECCN Code:

EAR99
EDA/CAD Models:

Request Free CAD Models for OPA325IDBVR

OPA325IDBVR Information

Description

The Texas Instruments OPA325IDBVR is a precision, zero-crossover op amp designed for high-performance applications. It features low noise (10nV/rtHz), wide bandwidth (10MHz), and low power consumption (0.65mA). This device is suitable for use in audio amplifiers, medical equipment, and other applications where high accuracy and stability are required. The OPA325IDBVR has a rail-to-rail input/output configuration, allowing it to operate with single-supply voltages between 2.2V and 5.5V. Its low offset voltage (150µV) and high common-mode rejection ratio (114dB) ensure accurate amplification of small signals. This op amp is unity-gain stable and has a slew rate of 5V/µs, making it suitable for use in applications such as audio amplifiers, medical equipment, and industrial control systems.

Features

According to the product information, the features of OPA325IDBVR are:

Precision with zero-crossover distortion:
+ Low offset voltage: 150 µV (maximum)
+ High CMRR: 114 dB
+ Rail-to-rail I/O
Wide bandwidth: 10 MHz
Quiescent current: 650 µA/ch
Single-supply voltage range: 2.2 V to 5.5 V
Low input bias current: 0.2 pA
Low noise: 9 nV/√Hz at 10 kHz
Slew rate: 5 V/µs
Unity-gain stable

Package

The package type of OPA325IDBVR is SOT-23 (DBV)-5.

Pinout

According to the product information, the package type is SOT-23 (DBV)-5, which typically has a pin count of 3 or 5 pins.

The OPA325IDBVR has a 5-pin package, with the functions:

Pin 1: VCC (positive supply voltage)
Pin 2: OUT (output)
Pin 3: IN (input)
Pin 4: GND (ground)
Pin 5: NC (no connect)

Please note that the exact pinout may vary depending on the specific device and manufacturer.

Manufacturer

The manufacturer of the OPA325IDBVR is Texas Instruments (TI). Texas Instruments is a multinational semiconductor company that designs, manufactures, tests, and sells semiconductors and other electronic components. The company was founded in 1930 and is headquartered in Dallas, Texas, USA. TI is one of the largest and most well-known semiconductor companies in the world, with a wide range of products including microprocessors, memory chips, and analog ICs like the OPA325IDBVR op-amp.

Equivalent

Based on the specifications, equivalent products to OPA325IDBVR could be:

OP07IDBVR (Texas Instruments)
LM833IDBVR (National Semiconductor)
TLV2771IDBVR (Texas Instruments)

These op-amps share similar characteristics such as low noise, wide bandwidth, and rail-to-rail I/O. However, please note that the exact equivalent product may depend on specific application requirements.

Specifications

Source Content uid	OPA325IDBVR	Pbfree Code	Yes
Part Life Cycle Code	Active	Reach Compliance Code	compliant
ECCN Code	EAR99	HTS Code	8542.33.00.01
Date Of Intro	2019-06-30	Amplifier Type	OPERATIONAL AMPLIFIER
Average Bias Current-Max (IIB)	0.01 µA	Bias Current-Max (IIB) @25C	0.00001 µA
Common-mode Reject Ratio-Min	100 dB	Common-mode Reject Ratio-Nom	114 dB
Input Offset Voltage-Max	150 µV	JESD-30 Code	R-PDSO-G5
JESD-609 Code	e4	Length	2.9 mm
Moisture Sensitivity Level	2	Number of Functions	1
Number of Terminals	5	Operating Temperature-Max	125 °C
Operating Temperature-Min	-40 °C	Peak Reflow Temperature (Cel)	260
Seated Height-Max	1.45 mm	Slew Rate-Nom	5 V/us
Supply Current-Max	0.75 mA	Supply Voltage Limit-Max	6 V
Supply Voltage-Nom (Vsup)	5 V	Surface Mount	YES
Technology	CMOS	Temperature Grade	AUTOMOTIVE
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)	Terminal Form	GULL WING
Terminal Pitch	0.95 mm	Terminal Position	DUAL
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED	Unity Gain BW-Nom	10000
Width	1.6 mm	Package/Case	SOT-23 (DBV)-5